RUC@home

How and where will the RAMSIS User Conference 2020 take place? This question has kept us busy a lot over the past few months. Now we'll take the most obvious solution: The RUC 2020 will come to you wherever you want to participate. It takes place virtually spread over several days – and it's free of charge. We would be delighted if you were to take part!

We start our online lecture series on 22 September.

Register now!

Kontakt

Dates

  I would like to make an individual appointment

About us

Only at Human Solutions – digital people, ergonomics competence and simulation

Our software and projects stand out clearly in the market – we combine extensive knowledge about people and digital ergonomics with our software for ergonomics simulation. This enables end-to-end digital ergonomics in development and top marks for efficiency, time-to-market and costs.

Dates

  I would like to make an individual appointment

Research

We are shaping the future

Human Solutions is investing heavily in high-tech and the product ergonomics of tomorrow. We conduct research in national and international projects, simplifying ergonomics, simulating human beings, creating the end-to-end digitalization of ergonomics and mastering the ergonomic challenges of autonomous driving.

Dates

  I would like to make an individual appointment

Career

With us...

Dates

  I would like to make an individual appointment

Blog

Standards define the visual values for vehicles. Testing for compliance with these standards is carried out using mirrors and cameras, while driving or maneuvering. The limit values of the individual standards and the compliance testing procedures are strictly regulated, but if a vehicle is developed in compliance with standards right from the outset, this will save considerable time and reduce costs.

Visual standards apply right around the vehicle – to the front, to the sides and to the rear. Structures like cables, lifting platforms, water tanks and wide fenders, bodywork & exhaust systems can interfere with vision, endangering compliance with standards. RAMSIS displays the visual fields geometrically in the CAD model, facilitating standard-compliant development by performing checks and corrections on the digital vehicle model. RAMSIS visual standards contain a great number of common visual standards.

RAMSIS simulates the real visual field in the CAD model of the vehicle – including all the relevant attachments. Our software generates the standard visual field geometrically based on the driver’s position and displays it in a three-dimensional environment.

The limit values of the standard and all the corresponding analysis methods are stored in RAMSIS, so the results can always be perfectly replicated, even on different versions of vehicles – and that simply cannot be done on a physical test stand.

All that has to be added is the specific vehicle data, such as vehicle geometry, movement possibilities, dimensions of the mirror & cameras, plus the position of the seat if required – and if the standard criteria are to be tightened up, users can change the values on request.

Dates

  I would like to make an individual appointment

CaseStudies

Airbus: How do you make Virtual Reality fly?

In Airbus aircraft, space concepts for aircraft companies can be realized with very different business models – from economy to luxury class. The company uses RAMSIS in VR for its cabin ergonomics.

Dates

  I would like to make an individual appointment

RAMSIS Defense Module

Special features of the RAMSIS Defense module

 

 

 

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

 

 

 

 

 

 

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

With RAMSIS Industrial vehicles you will achieve...

Dates

  I would like to make an individual appointment

Function modules

You’ve come to the right place

Make your RAMSIS software perfect for special applications in digital ergonomics.

Dates

  I would like to make an individual appointment

User Community

Login Error

Your login did not work. Please try again.

Dates

  I would like to make an individual appointment

RAMSIS User Conference

Agenda

29. October

09:00 - 09:20

Welcome und Check-in

09:20 - 09:30

Opening of the RAMSIS User Conference 2019
Stefan Dietz, Anton Preiß, Dr. Andreas Seidl

09:30 - 10:30

Key note speech: eMobility
Prof. Dr. Stefan Bratzel

10:30 - 11:00

Interview

11:00 - 11:15

Coffee break

11:15 - 11:45

Ergonomics tools in the agile product development of urban mobility solutions
Bunly Lay, e.Go Mobile AG

11:45 - 12:15

INSAA – How do we sit when our car drives for us?
Martin Fleischer, Lehrstuhl für Ergonomie - TU München

12:15 - 12:45

Panel Discussion

12:45 - 13:45

Lunch break

13:45 - 14:45

Presentation of the RAMSIS Excellence Award

14:45 - 15:00

Strategy at VW for eMobility and Introduction to the Factory tour

15:30

Start Factory tour and dinner

30. October

09:00 - 09:30

Design in the age of Experience | Human-centric design approach with 3DEXPERIENCE CATIA Design
Francois Daudet, Dassault Systems SE

09:30 - 10:00

Ergonomics 4.0: How RAMSIS changes ergonomics
Anton Preiß and Lukas Berger, Human Solutions GmbH

10:00 - 10:30

Panel discussion

10:30 - 11:00

Consulting using RAMSIS for the development of a Gaming Seat
Dr. Oliver Krockenberger, Recaro eGaming GmbH & Co. KG

11:00 - 11:15

Coffee break

11:15 - 11:45

How much space do you need? – work places in safety-critical environments
Carolin Dungs, IABG mbH

11:45 - 12:15

Body measurement and body shape knowledge for ergonomics - methods and current trends
Anke Rissiek, Avalution GmbH

12:15 - 12:45

The research project DELFIN - Dynamic ergonomic evaluations with RAMSIS
Dr. Hans-Joachim Wirsching, Human Solutions GmbH

12:45 - 13:45

Lunch break

13:45 - 14:15

The simulation movement for crawler excavator
SangHyuk Lee,  Hyundai Construction Equipment Co. Ltd.

14:15 - 14:45

Doing CAVA work with RAMSIS - A praxis description on how-to use RAMSIS and CATIA to calculate visibility volumes for upcoming EU demands
Paulo Fragoso, Scania CV AB

14:45 - 15:30

Closure lecture

15:30

End of the conference

Dates

  I would like to make an individual appointment

Engineering as a Service

Ergonomics Competence Center

Expertise for the new ergonomics

An interdisciplinary team of ergonomists, engineers, biomechanics specialists, psychologists and sports scientists is at your disposal in our Ergonomics Competence Center in Munich, Kaiserslautern or on your premises. We will work together on Ergonomics 4.0 to master the main challenges in ergonomics, e.g. concepts for autonomous driving and car sharing.

Dates

  I would like to make an individual appointment

Blog

Dear Customer, Dear Partner,

The world as we know it has changed – and it has happened very quickly. Even in these difficult times, we remain a reliable partner for you as always, and we will continue to provide you with the best possible support. We have also taken responsibility for our employees, providing them with the necessary equipment that will enable them to work from home for the time being. You can still reach your contact persons as usual.

Most of the arranged appointments that require a personal meeting will be postponed in consultation with you, or carried out online. This will be clarified in direct communication with your contact person.

If you have any questions at all, please do not hesitate to get in touch with your contact person.

You can reach our support team as usual on +49 631 343593 07 or at hotline@human-solutions.com

We wish you all the best – and keep well!

Dr. Andreas Seidl and your team from Human Solutions

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

This is what we have achieved

Dates

  I would like to make an individual appointment

Career

You’ve come to the right place!

Make more of yourself and strengthen our teams. We’re looking forward to meeting you!

Dates

  I would like to make an individual appointment

Kacheln aboutus

Software

RAMSIS has been part of the product development of outstanding companies since 1995 and the world´s leading software for digital ergonomics.

 

Dates

  I would like to make an individual appointment

Blog

Measurements in the USA have been completed, now it’s the turn of Canada – and all the results of the Size NorthAmerica serial measurement survey should be available by the end of 2019. The survey is being carried out by Human Solutions of North America and Avalution GmbH. The acquired data is specially processed to match the requirements of the automotive industry.

Size NorthAmerica is the most extensive measurement survey project that has ever been carried out on the North American continent – around 18,000 people in total will have been measured with 3D body scanners by project completion. The test persons are scanned in different postures, wearing their underwear. The acquired data is stored anonymously and subsequently processed for the demands of the automotive and apparel industries. The socio-demographic data of the test subjects is also acquired.

Why is this survey taking place?

Body dimensions change over years – and the precise knowledge of human body shapes is indispensable, especially for the development of vehicles and apparel. The body measurements and proportions of the North American population have changed considerably in recent decades, as has the demographic structure of the USA and Canada. The anthropometric data and the standard sizetables that are currently available are based on older data, so they are outdated and can only help the apparel industry in a limited way. Decades of gradual changes have not been taken into account, so detailed, up-to-date information on specific target groups and market shares is simply not available. Size NorthAmerica is recording and documenting the body dimension changes that have occurred during the past decades – and this means that accurate, instructive and up-to-date information will soon be made available for the automotive industry’s product development in terms of safety, handling and comfort.

More information is available at www.sizenorthamerica.com

Dates

  I would like to make an individual appointment

CaseStudies

ThyssenKrupp Marine Systems: Living and working in a submarine

Nowadays, submarine missions last for two to three months. Anyone who works in the tightest of spaces needs every available means of relief. Effective ergonomics concepts provide sufficient space and an optimum level of operability. The on-board ergonomics are tested with RAMSIS right from the outset.

Dates

  I would like to make an individual appointment

RAMSIS Defense Module

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Fakten

"The passenger cabin is one of the most expensive properties in the world, which is why every square inch is examined to save space – but there’s still enough room for comfort and ergonomics."

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

 

 

 

 

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

“A cabin can be made completely out of glass and yet the driver’s field of vision is still poor.”

Thomas Haubrich, Head of Design for drivers’ cabins and vehicle cabins at BOMAG

Dates

  I would like to make an individual appointment

Function modules

RAMSIS VirtualAging zeigt altersbedingte Leistungsveränderungen

Dates

  I would like to make an individual appointment

Anthropometry

RAMSIS – Definition of Anthropometric Types

In the past, the discussion of body measurements as related to design requirements was frequently reduced to the consideration of just stature. This has the big advantage that the complicated analysis and consideration of multi dimensional statistical variables was cut down to a one dimensional problem.
Evidently, for many design problems this reduction to the one dimensional case is not adequate. This is why Human Solutions has developed a special anthropometric typology for RAMSIS.
This RAMSIS typology is based on the fact that the full anthropometric variability of a population can be condensed very efficiently down to the “key dimensions”

  • body height
  • ratio of sitting height over body height ("proportion") and
  • waist circumference.

The document explains the definition process of the RAMSIS typology and provides application examples for ergonomic analyses.

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

Our vision – ergonomics becomes simple

Human Solutions is the first choice when it comes to solutions for digital ergonomics. To make ergonomics a matter of course for all products, we intend to make ergonomics simulation so simple that everyone can use it.

Dates

  I would like to make an individual appointment

Career

Come to Human Solutions

Make more of yourself and strengthen our team. We look forward to meeting you!

Dates

  I would like to make an individual appointment

Competence

The focus on ergonomics

On our competence platform, ergonomics experts provide orientation on trends and information on the main tasks of ergonomics in product development.

Dates

  I would like to make an individual appointment

CaseStudies

KTM: Bits & Bikes

If you want to see ergonomics in perfection, a trip to Austria is worthwhile. At KTM, the driving experience sets the tone. Since the company introduced RAMSIS, the honing of the riding experience begins before the first product sketch.

Dates

  I would like to make an individual appointment

RAMSIS Defense Module

Best Practice with RAMSIS Defense

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Fakten

"During driving, the back suffers more from understrain, especially from lack of movement due to prolonged sitting – so seats must be optimally adjustable."

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

Digital Cockpit and Passenger Cabin Simulation in Aircraft

Room and ergonomics – perfect for every airline

The requirements airlines place on aircraft are multi-faceted: the cockpit must be designed for an international pilot crew and the interior space must be used economically, but still meet ergonomic requirements. RAMSIS Aircraft meets all these complex requirements and implements them, realistically simulating the posture and movement of pilots, flight crew, passengers and workers in digital design. You can meet the requirements for interior aircraft design perfectly – without the need for any physical mock-ups.

Dates

  I would like to make an individual appointment

RAMSIS Bus & Truck Module

Special features of the RAMSIS Bus & Truck module

 

 

 

 

Dates

  I would like to make an individual appointment

Function modules

Perfect seat ergonomics with the RAMSIS Seat Design Modules

Ergonomic seat design   Human/Seat interaction  Ergonomics limit values  

Seat height and seat position influence ergonomics in the vehicle. That’s why we created the RAMSIS Seat Design module – to enable ergonomic seat design in vehicles. RAMSIS shows how the customer wants to sit in the vehicle and RAMSIS Seat Design shows how the seat supports him. Thanks to this detailed knowledge of the effects of seat positioning on comfort/discomfort, reachability and vision, the suitability of a vehicle for the entire defined target group can be ensured at an early stage.

Dates

  I would like to make an individual appointment

User Community

Dates

  I would like to make an individual appointment

Anthropometry

Body Dimensions of Chinese Adults According to GB10000-88 - Background Information

The Chinese national norm GB10000-88 Body Dimensions of Chinese Adults contains official and fundamental anthropometric information about the Chinese population, with respect to the ergono-mic requirements for construction of work places and machines. The GB10000-88 contains data of 47 body dimensions, divided into 7 groups of related dimen-sions. The age range is 16-60 years for male and 18-55 for female subjects. Besides the entire age range, data are also grouped in three age groups: 18-25 for males and females and 36-60 for ma-les resp. 36-55 for females. The data are presented separately for males and females.

Dates

  I would like to make an individual appointment

Blog

The results of the Size NorthAmerica series measurement are available in the database for RAMSIS Standalone NextGen – the digital human model can now be optimally used for ergonomic analyses of the American market. Size NorthAmerica offers the latest representative body dimension data of the population in the USA and Canada.

Around 14,000 people were measured in the USA and a total of more than 55,000 body scans were collected. The available body dimension data is divided into nine age groups, four regions and five ethnic groups. Body height ranges from 99 to 203.9 centimetres, weight from 17.7 to 229.7 kilograms. Sociodemographic data were also collected in the course of the study.

Compared with the US NHANES III study from 1990, accelerated to 2008, the average changes are as follows:

 

Women USA total

Men USA total

Body height

+ 1.1 cm

 

+ 1.0 cm

Chest circumference

+ 4.8 cm

+ 4.4 cm

Waist circumference

+ 2.5 cm

+ 5.0 cm

Hip circumference

+ 9.2 cm

+ 6.6 cm

 

Average BMI alarmingly high

However, even more clearly than the pure body measurements, another value shows how much the population of the USA has changed – the Body Mass Index (BMI). It is the highest average value ever determined in a series measurement and proves that the proportion of overweight people in the USA is significantly higher than in other nations: more than half of the adult population is too heavy! Particularly challenging for the industry: The spectrum of different BMIs is very large in the USA and is distributed differently from region to region – for example, the BMI in the western USA is significantly lower than in the Midwest.

 

Women USA total

Men USA total

Normal weight

30.8%

22.4%

Pre-obesity

28.1%

38.5%

Obesity class I-III

39.8%

38.6%

 

You want to know more about Size NorthAmerica's results? Get in contact with us! contact@human-solutions.com

For customers in North or South America and Canada, please contact our US-Team: contact.usa@human-soluitons.com

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

We want ergonomics for everyone. Digital ergonomics should be so simple that anyone can use them.

Anton Preiß, Director, Human Solutions

Dates

  I would like to make an individual appointment

Career

This is what distinguishes us

Dates

  I would like to make an individual appointment

Competence

Order the article you want now

You'll get it by e-mail right away

Dates

  I would like to make an individual appointment

CaseStudies

John Deere: Agriculture goes it alone

A traditional industry is leading the way in sustainably increasing crop yields: Autonomous driving has long been a “fait accompli” in agriculture. Hardly anyone has a better idea of what the future holds in the way of technical possibilities than August Altherr of Deere & Company.

Dates

  I would like to make an individual appointment

RAMSIS Defense Module

Ergonomics with equipment

Ergonomics simulation in emergency vehicles

Accurate vehicle design is particularly important in confined spaces – and the RAMSIS Defense module provides the necessary practical relevance, ensuring that protective equipment cannot get in the way or pose a safety risk. Posture, effort and analysis results correspond to real use, even if space is at a premium and the occupants also have to wear additionally-restrictive protective clothing and equipment.

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Fakten

"German motorists spend 41 hours a year looking for a parking slot."

Dates

  I would like to make an individual appointment

RAMSIS Automotive

Special features of RAMSIS Automotive

 

 

 

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

You’ve come to the right place

Make your machines unique with comfortable and safe handling.

Dates

  I would like to make an individual appointment

RAMSIS Bus & Truck Module

Dates

  I would like to make an individual appointment

Function modules

Age-appropriate vehicle design with the RAMSIS VirtualAging module

A target group with real purchasing power   Age-appropriate vehicle concepts   Transparent age-related changes in performance  

In the year 2060, every third German will be over 65 years old. The market power of the 50+ target group is also increasing on an international scale – and this demographic change also affects ergonomic requirements – especially in vehicles! RAMSIS can be expanded with the VirtualAging module to meet the requirements of the older generation.

Dates

  I would like to make an individual appointment

User Community

Registration for the Closed User Group

Dates

  I would like to make an individual appointment

Anthropometry

CAD Modeling of a 3D Child Body

To reduce the mortality of children in car accidents the legislator in Germany decided to introduce new laws. One of these new instructions is that children must fasten their seatbelt in cars.
This paper describes the development of a RAMSIS child manikin.

Dates

  I would like to make an individual appointment

RUC@home

RUC@home

How and where will the RAMSIS User Conference 2020 take place? This question has kept us busy a lot over the past few months. Now we'll take the most obvious solution: The RUC 2020 will come to you wherever you want to participate. It takes place virtually spread over several days – and it's free of charge. We would be delighted if you were to take part!

We start our online lecture series on 22 September.

Register now!

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

You can only develop digitally if the ergonomics can also be tested digitally – and Human Solutions does exactly that, thanks to real data on people, top-functionality and optimal integration into product development.

Dr. Andreas Seidl, CEO, Human Solutions

 

Dates

  I would like to make an individual appointment

Career

Our team has many facets. So who are you?

Are you an idea finder, facilitator or a motivator? Are you perhaps a calming influence, a bundle of energy, a mediator, a lover of detail, or an endurance wonder? At Human Solutions you’ll get many opportunities to prove yourself, to contribute your ideas and to further develop your skills.

We’re looking forward to getting to know you.

 

 

 

 

Dates

  I would like to make an individual appointment

Articles

Focus: autonomous driving

“Throwing a switch in your head”

Some ask the question, “What’s the use of ergonomics if the automobile drives itself anyway?” The answer lies in the transition between driver attention and relaxed entertainment in the vehicle – because there shouldn’t even be a couple of seconds between the relaxed entertainment and the attentive driving phases. Professor Bengler and Christian Müller discuss the new tasks of ergonomics.

Dates

  I would like to make an individual appointment

CaseStudies

HS Esslingen: How do you build a car in seven months?

The Formula Student is an international competition. It”s all about car racing – but it”s mainly race cars that are built. There are many ideas, but time is usually scarce and the budget is tight. That”s why the Esslingen racing team uses RAMSIS.

Dates

  I would like to make an individual appointment

RAMSIS Defense Module

Mit dem Fahrzeug im Einsatz

RAMSIS Defense ist ein Modul zur bewährten RAMSIS-Software und ergänzt diese um spezielle Funktionen für Einsatzkräfte im Fahrzeug.

Dates

  I would like to make an individual appointment

RAMSIS Automotive

Best Practice with RAMSIS for automobiles

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

NEU!! RAMSIS Cognitive – Information nicht nur sehen, auch verstehen!

Dates

  I would like to make an individual appointment

RAMSIS Bus & Truck Module

Best practice with RAMSIS for buses and trucks

Dates

  I would like to make an individual appointment

Function modules

Easier & faster market approval thanks to standard-compliant development with the RAMSIS Visuals Standards & Directives module

Early check of the standard   No physical test benches needed   Fast market approval  

Standard-compliant development right from the outset. RAMSIS Visual Standards lets you display the real fields of vision that are required by law. Violations of the standard specifications are displayed immediately. The digital tests can also be reproduced on different vehicle variants.

  StVZO §35b ECE-R 46 ECE-R 125
  StVZO §35b ECE-R 46 SAE J 1750
  StVZO §35b ECE-R 46 EBSF ISO 16121-2
  StVZO §35b ISO 5006
  StVZO §35b ISO 5721
  StVZO §35b ECE-R 46

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

Posture Simulation

RAMSIS – Posture Prediction Models

A great variety of ergonomic questions such as reach, visibility, operating ability etc. require the analysis of posture and position of the human operator relative to his environment. Therefore, precise knowledge of the posture to be expected depending on body dimensions, surrounding geometry and operation task is necessary.
This is why RAMSIS offers a function for posture simulation, i. e. automatic calculation of postures relating to defined tasks. The indispensable correspondence to reality is guaranteed by a so-called posture model.
Starting from a special posture model for car drivers, meanwhile Human Solutions has developed a variety of special posture models for specific application areas.
The document provides background information about the definition process of posture models as well as a comprehensive overview of all posture models which are currently available.

Dates

  I would like to make an individual appointment

RAMSIS Excellence Award

Application

Applications are open to all students, doctorate students and scientific staff who have completed their studies in ergonomics. Please fill in the attached application form with the required information about yourself and about your work project.

The deadline for you application is 2 July 2021 (Date of postmark/e-mail). Documents received after this date will not be considered.

Send all documents to:

Human Solutions GmbH
RAMSIS Excellence Award
Marketing Division
Europaallee 10
67657 Kaiserslautern/GERMANY

or e-mail to:

alexandra.lang@human-solutions.com

or use the form at the end of this page.

All REA participants will receive written confirmation when we receive the application documents. Only fully completed application forms will be considered. In participating, candidates agree to the conditions of participation and affirm that all the information given in the application form is truthful.

Dates

  I would like to make an individual appointment

Career

  +49 631 343 593 32

  personal@human-solutions.com

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

We focus on our customers. We develop many functions together with leading companies and are closely networked with technology experts in our markets.

Gunter Gilberg, Sales, Human Solutions

Dates

  I would like to make an individual appointment

Offene Stellen

Dates

  I would like to make an individual appointment

Articles

Focus: demography

Getting old isn’t for cowards

A new research project shows the deviations in vision, movement and perception that can occur from the age of 50. With RAMSIS VirtualAging, the results of these field studies can be transferred to industrial ergonomics analyses and the effects on normal driving situations – and that’s really worthwhile!

Dates

  I would like to make an individual appointment

CaseStudies

Clemson University: Deep Orange & RAMSIS

Clemson University’s Deep Orange program is extraordinary, because students start with their ideas and end up with a finished vehicle. Ergonomic comfort and safety are tested with RAMSIS.

Dates

  I would like to make an individual appointment

RAMSIS Defense Module

You’ve come to the right place!

Make your emergency vehicle unique with comfortable and safe handling.

Dates

  I would like to make an individual appointment

RAMSIS Automotive

 

 

 

 

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

With RAMSIS Aircraft you will achieve...

Dates

  I would like to make an individual appointment

RAMSIS Bus & Truck Module

Overweight drivers often find it difficult
 to move around in the cabin.

Daimler wants to remedy this situation.

Dates

  I would like to make an individual appointment

Function modules

Zentrale Sitzparameter mit RAMSIS Seat Design

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

Egonomic Analysis

RAMSIS Vision Simulation – Functions and Basic Data

For humans the visual sense is by far the most important channel for acquiring information. This makes vision analysis an aspect of particular importance for the ergonomic quality of products and workplaces – with no distinction between direct and indirect vision.
This is why RAMSIS provides users with an extensive set of vision-related simulation and analysis functions. Vision obstructions can be detected and analyzed visually by switching the view to the manikin’s perspective or geometrically by calculating vision cones and hidden surface segments. A powerful mirror simulation function allows for defining mirrors of arbitrary curvature and shape including the mirror kinematics.
Of course, all of these functions require precise posture prediction including the manikin’s vision direction to gain strength and reliability. This is why vision-related experiments have always been an integrated part of the RAMSIS R&D project.
This document provides a concise overview about both, the vision-related posture experiments for RAMSIS and the vision analysis functionality of the RAMSIS software.

Dates

  I would like to make an individual appointment

RAMSIS Excellence Award

RAMSIS Excellence Award 2021

Mobility shapes life in a globalised society. The more time we spend in vehicles, the more important the demands on usability, safety and comfort become. Taking people‘s movements into account when designing a vehicle is a major challenge. RAMSIS is the world‘s leading ergonomics tool for the automotive industry and state-of-the-art technology for the ergonomic interior design of vehicles.

The RAMSIS Excellence Award will be presented by Human Solutions for the fourteenth time. The prize is awarded for scientific work that deals with the topic of vehicle ergonomics in the broadest sense of the term. The RAMSIS Excellence Award is intended to help students and scientific research associates gain an insight into the processes of the automotive industry and to establish valuable contacts within the industry by participating in the RAMSIS User Conference.

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

Footer

The following terms and conditions apply to offers and other agreements for goods and services from Human Solutions GmbH.

1      Scope of Application

1.1   These terms and conditions apply exclusively. Different or conflicting terms shall not be accepted unless we have expressly agreed to them in writing.

1.2   These terms and conditions also apply to all future transactions between the Parties, even if we carry out delivery while aware of differing or conflicting terms and conditions.

1.3   These terms apply only to entrepreneurs and legal entities of public law.

2      Conclusion of the Agreement

2.1   Our offers are non-binding, unless an offer is designated as binding in writing.

2.2   A legally binding relationship can only become effective through a mutually signed contract or by the Customer’s order and written confirmation from us, and also through the fact that we are starting (or have started) the performance of the contractual services. The prices and conditions of the signed contract or written order confirmation shall apply.

2.3   Insofar as the order constitutes an offer within the meaning of § 145 BGB (German legal code), we shall be entitled to accept such offer within a period of two weeks.

3      Subject of the Agreement

3.1   If the subject of the Agreement is software and/or hardware, product descriptions and representations in test programs are only descriptions of services, not guarantees. In order to be valid, a guaranty must be made in writing from company management.

3.2   The Customer has no rights to the surrender or delivery of the source code. We shall render our performance in accordance with the state of technology at the time the Agreement was concluded. The scope of performance of the software is derived from the current description of the software in question. Unavailable software features which extend beyond this scope of performance do not entitle the Customer to withhold payments unless the availability of these features was previously assured by us in writing.

3.3   The software is legally protected. Copyrights, patents, trademarks and all other ancillary rights to the software as well as to other objects which we provide or make available to the Customer in the context of contract negotiations and execution remain our exclusive property in the relationship of the parties. If the rights belong to third parties, we have corresponding exploitation rights.

3.4   The Customer purchases the software for internal purposes (basic usage right) for his own perpetual use. To exercise the usage right, the Customer receives the computer program in object version on a computer-readable medium or via remote data transmission, as well as the documentation and installation instructions. Usage may not exceed the number of workplaces stipulated in the Agreement. We hereby grant the Customer the program rights that are necessary for its usage, as well as the right to copy the program to memory and hard disks, and the right to correct errors. The Customer may make backup copies of the program that are deemed necessary for secure operation. These copies shall be marked as such and provided with copyright identification of the original data media. Copyright notices may neither be removed, altered nor covered. The user manual may only be copied for internal use within the Customer’s company. The Customer must inform us in writing of any subsequent changes to installation locations.

3.5     Upon transfer of the software, we are entitled to hand over a temporary, executable program version, together with the undertaking to make the unlimited license key available immediately after payment of all fees, etc. that become due after the software has been transferred.

3.6   Redistribution of the software (in whole or in part) to a third party, in particular by renting, lending or distribution in any tangible or intangible form, is not permitted without our prior written consent. This consent is given under the following conditions:

3.6.1     The Purchaser shall deliver to the third parties (if any) the original disks, destroy all copies, especially on disks in hard drives or storage, cease usage totally and confirm in writing the performance of such obligations.

3.6.2     The third party shall provide us with written notification that it shall adhere to the provision of this Agreement, and particularly those in this Section 3.

3.6.3     There are no salient grounds for objections.

3.7   The right to decompile the software is granted only subject to the conditions of § 69 e Section 1, paragraphs 1-3 of the German Copyright Act and § 69 e Section 2, paragraphs 1 to 3 of the German Copyright Act.

3.8   Construction or design modifications arising from technology improvements or required by law shall remain reserved during the delivery period, insofar as the article of sale is not considerably modified and any modifications are deemed reasonable for the Customer.

4      Delivery

4.1   The delivery requires the timely and proper fulfillment of the obligation of the Customer. Defences based on non-performance of the contract are reserved.

4.2   In case of default in acceptance or other breach of duties to cooperate by the Customer we are entitled to claim any resulting damage including but not limited to additional expenses, if any. Further damages are reserved. In this case, the risk of loss or damage to the goods passes to the Customer at the time of such default or breach of duty to cooperate.

4.3   Human Solutions reserves the right to perform partial deliveries or services, insofar as deemed reasonable for the Customer.

5      Prices, Payment

5.1   Our prices are ex-works, plus the statutory VAT and excluding the costs of packing, unless otherwise expressly agreed. Invoices are payable without deduction within 14 days of the date of the invoice. During maintenance and care services the remuneration for each calendar year will be issued in advance invoices.

5.2   Price changes are permitted in cases where more than four months have expired between the close of purchase and the agreed-upon delivery date. In the case of subsequent increases (until completion of delivery) in wages, material costs or the standard market purchasing costs, we are entitled to increase our prices commensurate with such cost increases. The Customer may withdraw from the Agreement only if the aforesaid price increases more than moderately exceeds the increase in the general cost of living.

5.3    Any additional services demanded by the Customer (e.g., consultancy and support during program installation) shall be invoiced in accordance with our current price list.

5.4   In the case of any delay in payment, we shall have the right to suspend delivery until payment has been made.

5.5   Overdue payments are at an interest rate of nine per cent per annum above the current base interest rate. We retain the right to claim further default damages.

5.6   Any set-off by the Customer is permitted only with undisputed or legally established counterclaims. The same applies to the retention rights of the Customer.

5.7   With continued obligation agreements (such as care & maintenance) we may adjust the prices (e.g. the maintenance fee) annually to match the general price trend. Such increase will become effective at the beginning of the new contract year. Should these adjustments result in a price increase of more than 4%, the Customer may terminate the Agreement.

6      Passing of Risk

When shipping the goods at the Customer’s request, the risk of accidental loss and accidental deterioration of the goods passes to the Customer at the time of dispatch.

7      Customer Participation

7.1   The Customer will provide us with support for previously-agreed installation and training to the extent required. The Customer shall pass on the necessary information and documents and grant access to his business, if such access is required for installation work and training.

7.2   The Customer shall ensure that all spatial, technical, infrastructure and other setup and connection conditions required for system installation and start-up are in place.

8      Acceptance

8.1   Completed works must be accepted. The acceptance is validated by the signature of the Customer below the receipt form.

8.2   If the Customer does not sign the acceptance without delay, we may set a time limit of one week (in writing) for the Customer to do so. Acceptance shall be deemed to have taken place, if the Customer does not specify (in writing and within this period) the reasons for the refusal of the acceptance.

8.3   The Certificate of Acceptance shall list the results of system testing. If necessary, an agreement shall be made with the Customer on required repairs/improvements and a time for additional testing.

9      Training

We shall train the employees of the Customer in accordance with the contractual provisions. In the event of legitimate Customer dissatisfaction, we shall have the opportunity to remedy the situation.

10    Defects

10.1  The subject of the Agreement shall have the features and properties stipulated in the Agreement, shall be suitable for the otherwise standard usage stipulated in the conditions of the Agreement and shall be of standard quality for software of this type. Product descriptions without a separate written agreement shall not constitute a guarantee. Software errors resulting from hardware defects, environmental conditions or improper usage shall not be considered as defects. Insignificant deteriorations in quality will not be taken into account. In respect of updates, upgrades and the delivery of new versions, the warranty shall be limited to new features of the update, upgrade or new versions compared to the previous version release.

10.2.1 Purchase The Customer only has the right to replacement performance in the case of defect claims. Such replacement performance may consist of the repair of the defects or the replacement of the defective part. Subsequent performance may also take place through the delivery or installation of a new program version or a work-around. If the replacement performance fails or if we definitively refuse to execute subsequent performance, the Customer may cancel the contract or reduce the purchase price and, if we are responsible for the defect, claim compensation or reimbursement of the futile expenses incurred pursuant to Section 12. If the defect does not affect functionality, or only slightly affects it, we are entitled (to the exclusion of further warranty rights) to remedy the defect by providing a new version or an update in the context of version, update and upgrade planning. Prerequisite for any warranty claims, however, is that the Customer shall properly fulfill its duties regarding inspection obligations and its duty to give notice of defects pursuant to § 377 of the German Commercial Code.

10.2.2 Rent If the subject of the Agreement has defects, and those defects detract not immaterially from its contractual use, the Customer (if it has complied with its duty to report defects) has the right to a reduction of rent and to damages, and the right to demand the remedying of such defects from us without prejudice to the Customer’s legal claims. We may provide a replacement instead of taking remedial measures. The Customer may terminate the Agreement without notice if defects are not remedied by us, or if we do not deliver replacements.

10.2.3 Contract for work and services (software development, installation and other contractual work services). In the case of defective performance in software development or other contractual work services, the Customer may demand replacement performance from us within a reasonable time. If replacement performance fails, the Customer (with respect to the software development or other additional services) may demand to cancel the Agreement or have the price reduced and, if we are responsible for the defect in question, demand damages or compensation for his futile expenditure from us, pursuant to Section 12.

10.2.4 Care and Maintenance We accept no responsibility for correction of the error. In case of defective performance in maintenance or care, the Customer may demand replacement performance from us within a reasonable time. If replacement performance fails, the Customer may terminate the care or maintenance agreement without notice or reduce the monthly care or maintenance fee and, if we are responsible for the defect, claim compensation or reimbursement of futile expenses incurred pursuant to Section 12. Replacement performance may also take place through the delivery or installation of a new program version or a work-around. Licensed product services for a release that is no longer maintained by us are not included in our Customer support services.

10.3 The warranties are waived if the Customer or third party improperly installs, uses, cares for, maintains or repairs the subject of the Agreement, or if the ambient conditions required by the manufacturer are not complied with. The Customer is free to prove that these circumstances are not the cause of the defect. In the case of software, the warranty obligation is also void if original labels or ID markings are changed.

11    Rights in Case of Defects in Title

11.1 We guarantee that the contractual usage of the subject of the Agreement by the Customer does not infringe upon the rights of any third party. In the case of defects, we guarantee (at the Customer’s discretion) that we shall provide a legally sound usage method for the subject of the Agreement or for an equivalent subject of the agreement.

11.2  The Customer shall inform us immediately in writing if any third party makes infringement claims (e.g., copyright or patent rights) against it. The Customer grants us the right to conduct any legal actions against said third party on our own account. If the Customer makes use of this authorization, the Customer may not itself recognize the claims of any third party without our consent. We shall contest claims by third parties at our own expense and release the Customer from the payment of all costs connected with contesting these claims, insofar as the claims are not occasioned by conduct of the Customer in violation of his obligations (e.g. the use of software programs in violation of the contract).

11.3  Liability is governed by the terms stipulated in Section 12; the statute of limitations is governed by the terms stipulated in Section 14.

12    Liability / Damages

12.1 We pay damages or compensation for futile expenses to the following extent, regardless of the legal basis:

12.1.1   The liability for intent, gross negligence and warranty shall be unlimited.

12.1.2   In the case of gross negligence of other vicarious agents, we shall be liable for damages typical for this type of agreement and which were foreseeable at the time of the conclusion of the Agreement.

12.1.3   We shall be liable for losses caused by any breach of our primary obligations and by our legal representatives or vicarious agents. Primary obligations are the basic duties which form the essence of the Agreement. Such duties were decisive for the conclusion of the Agreement and for the performance of which the Customer may rely. If we violate these primary obligations through simple negligence, liability is limited to the amount that was foreseeable at the time of the performance in question.

12.1.4   We have unlimited liability for intentional or negligent damages caused from injury to life, limb or health. We are liable for product liability damages in accordance with the regulations in the product liability law.

12.1.5   We are liable for damages caused by the absence of guaranteed features up to the amount covered by the purpose of the assurance and which was apparent to us at the time of the issue of the assurance.

12.2  The option of claiming contributory negligence remains open to us. The Customer has in particular the obligation to carry out data backup and to prevent any unauthorized third party access (esp. protection against viruses, Trojan-type viruses or similar) in accordance with current, state-of-the-art technology. Liability for loss of data shall be limited to the typical amount of effort involved in the data restoration, which also would have applied in the case of the regular and risk-pertinent manufacture of backup copies.

13    Rights to work results/Copyrights

13.1  We hereby grant the Customer non-exclusive, ordinary right of use for the software. Content and portability of this right of use are based on the provisions contained in paragraphs 3.4, 3.5 and 3.6.

13.2  The Customer shall immediately provide us with all relevant information about any inventions or other patentable results that arise in connection with the execution of the Agreement. All inventions shall be transferred to us. We reserve all rights in respect of any subsequent patentable rights. If we have no interest in registering an invention for patent, we shall retransfer the invention to the Customer, whereby an ordinary, royalty-free and unrestricted right of use remains for us.

14      Statutory Limitations

14.1  The statute of limitations shall be deemed to be:

14.1.1 one year from delivery of the subject of the Agreement for claims for repayment of purchase price arising from withdrawal or reduction; however, not less than three months from submittal of the legally binding declaration of withdrawal or reduction;

14.1.2 one year for other claims arising from defects;

14.1.3 one year for claims arising from infringement, provided said infringement does not pertain to a third party, on the basis of which the third party can demand the return of the subject of the Agreement;

14.1.4 one year for other claims for damages or compensation for futile expenditure, beginning from the time at which the Customer becomes aware of the circumstances which give rise to the claim or would, in the absence of gross negligence, have found out about such circumstances.

The statute of limitations shall take effect at the latest upon expiration of the limits set forth in § 199 of the German legal code (BGB).

14.2  For damages and compensation claims arising from willful acts, gross negligence, guarantees, bad faith and the cases specified in paragraph 14.2, all legal statute of limitations provisions shall apply at all times.

15      Confidentiality

The parties agree that their contractual relationship may provide them with access to information that is confidential for the other party (“Confidential Information”). Confidential information is limited to the subject of the Agreement and to any information that is clearly identified by one of the parties as confidential. The parties agree that confidential information (a) shall be kept secret for an unlimited period; (b) shall not be made accessible in any form to third parties (other than those of their employees or consultants who are subject to the obligation of non-disclosure) and (c) shall not be used for purposes other than those provided for in this Agreement.

16      Term and Termination

16.1 Term and termination deadlines arise from continued obligation agreements which pertain to the respective individual agreements.

16.2 The right to terminate the Agreement for good cause remains unaffected. Grounds for such termination include

16.2.1 an application for the opening of insolvency proceedings over the assets of the other party has been made or

16.2.2 insolvency proceedings over the assets of the other party have been opened or such opening was rejected for lack of assets or

16.2.3 an affidavit has been or is being declared for the assets of the Customer.

Grounds for termination for us are also

16.2.4 if the Customer or its successor, despite repeated reminders with reasonable grace, does not meet, or fully meet its payment obligations

16.2.5 if facts become known that the Customer is involved in sufficiently-founded suspicions of criminal activity, especially any criminal offense for fraud, embezzlement, bankruptcy offenses, offenses against the competition, the granting of favors, the receiving of bribes, bribery, corruption, etc.

16.3 The provisions of paragraphs 13 and 15 shall survive termination of this Agreement.

17    Other Provisions

17.1  The transfer of rights and obligations under the Agreement concluded with us require written consent to become valid; however, § 354 a of the HGB shall remain unaffected.

17.2  Regarding purchasing, we shall retain title to the delivered goods until receipt of all payments from the entire business relationship. Until transfer of ownership has taken place, the Customer shall undertake to handle the article of sale with all due care. In case of breach of contract by the Customer, in particular through default of payment, we have the right, at the expense of the Customer, to demand the return of the purchase item, or all copies of the licensed product for which we have retained the property rights, or if applicable, to demand the assignment of the licensee’s (the Customer’s) right of return against third parties. In this case and upon request, the Customer shall confirm in writing that it has not retained any copies of the licensed product(s) and that all installations of the licensed product(s) have been permanently deleted from the system of the Customer or that of the third party. Before the final transfer of ownership, the Customer shall require our prior written consent to receive the rights to the licensed product.

17.3   We are entitled to refer to the (brand) name/corporate name of the Customer (with company address, where applicable) and the company logo/brand of the Customer on the website under the Customers/References section, and in connection with the presentation of the service portfolio (e.g. in PowerPoint presentations and demos) in order to point out the joint economic relationship in the case of press reports.

We undertake to use the company name and the logo of the customer exclusively for the purposes mentioned in sentence 1. Any further use is excluded.

17.4  Verbal agreements are not part of this contract. Modifications and additional provisions are effective only if agreed in writing. This also applies to agreements which abolish the written requirement.

17.5  If a provision is or becomes invalid, this shall not affect the validity of the remaining provisions.

17.6  We are entitled to employ sub-contractors to perform any of the agreed contractual obligations.

17.7  The laws of the Federal Republic of Germany shall apply exclusively with the exception of the UN Sales Convention (CISG), even if the Customer has its headquarters abroad.

17.8  For all disputes arising from the contractual relationship, the Customer shall agree that our headquarters shall be the place of jurisdiction, if the Customer is a registered trader, a legal entity or a special assets fund under public law or if the Customer has no place of domicile in the Federal Republic of Germany at the time legal proceedings are started. We are also entitled to sue at the headquarters of the Customer.

 

Dates

  I would like to make an individual appointment

Login

Ihre Benutzerdaten sind fehlerhaft, bitte versuchen Sie es erneut!

Dates

  I would like to make an individual appointment

worldwide/Partner

Worldwide support

Human Solutions supports its customers with consulting and support worldwide in its own subsidiaries and in a highly qualified partner network.

Dates

  I would like to make an individual appointment

Hauptnavigation

Best Practice

 

Dates

  I would like to make an individual appointment

Engineering as a Service

Dates

  I would like to make an individual appointment

CaseStudies

BOMAG: How do you make heavy work lighter and easier?

BOMAG machines are heavy – and those who operate them really need to know what they”re doing. The main prerequisite is that every driver has perfect control of his machine. The standards state that as a minimum, but BOMAG often takes it a step or two further ...

Dates

  I would like to make an individual appointment

RAMSIS Defense Module

So starten Sie mit RAMSIS Defense

Dates

  I would like to make an individual appointment

RAMSIS Automotive

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

In Airbus aircraft, space concepts can be realized from economy to first class.

Dates

  I would like to make an individual appointment

RAMSIS Bus & Truck Module

Das Fahrzeug als Arbeitsplatz

Dates

  I would like to make an individual appointment

RAMSIS User Conference

Register for the RUC by 30 September 2019 at the latest.

Dates

  I would like to make an individual appointment

Downloads

You have a version in use that is not listed here?

Please contact us.

Dates

  I would like to make an individual appointment

RAMSIS Excellence Award

Usage rights

  • All submitted projects may be used for the competition and its relevant journalistic evaluation.
  • In particular, Human Solutions is entitled to publish the projects selected by the jury for this purpose in newspapers, journals and other publications – but only in the context of the compe- tition and its journalistic analysis. Participants are not entitled to claim any fee for such usage. The participant has the right to provide the project with his/her copyright note.
  • The participant agrees that his/her personal data may be acquired, stored and used for the purpose of the realization of the competition. Any further use of the data by the Human Solu- tions GmbH will not occur.
  • The jury´s decision is final. No actionable claim can be made against the Human Solutions GmbH for payment of the prize money.

Dates

  I would like to make an individual appointment

Engineering as a Service

Our range of services

As specialists for ergonomics, we offer you a special combination of expertise, data, methods and tools to make your products successful and strengthen your processes.

Dates

  I would like to make an individual appointment

Footer

Data Protection Declaration

This data protection information informs you about the processing of your personal data by us and the rights you are entitled to in accordance with the EU General Data Protection Regulation (GDPR) in force from May 25, 2018.

1. Responsibility for data processing

Human Solutions GmbH, Europaallee 10, 67657 Kaiserslautern, Germany

represented by the CEO Dr. Andreas Seidl, (Phone: +49 89/90505-0; E-Mail: contact@human-solutions.com). Data Protection Officer: Mr. Werner Wehrum, Tel.: +49 89/90505-162; E-Mail: werner.wehrum@assyst.de

2. Data collection and processing

We process data that we receive from you.

On the websites of our Group you can

  • subscribe to our Newsletter,
  • use the contact form to request information material on the individual divisions or
  • register for trade fairs/events via the contact form.

When subscribing to our Newsletter, the e-mail address is requested, which, if you do not agree to further use, will only be used for sending the Newsletter to you. We use the double opt-in procedure to confirm your registration and consent. We will storage your confirmation for the documentation and as proof of your consent. You can unsubscribe from the Newsletter at any time via the included Unsubscribe link.

The data collected via the contact form result from the respective input mask, which is used for the registration. This mask includes your first and last names, the name and address of the company you work for, your e-mail address and, if applicable, your telephone number.

By registering on the website, the IP address assigned by the Internet Service Provider (ISP) and the date and time of registration are also stored.

You can also register for trade fairs and events by e-mail or a fax form. The data entered in the e-mail signature or requested in the fax form is collected, such as first and last name, the name and address of the company you work for, your e-mail address and, if applicable, your telephone and fax number.

If the forms contain mandatory fields, these are marked separately in detail.

3. Purposes and legal bases

a) Fulfillment of the contract (Article 6, paragraph 1, letter b of the GDPR)

The collected data is used to answer your inquiries, to process your orders or to provide you with requested access to certain information or offers (sending of newsletters, sending of information material, handling of trade fairs and events).

b) Consent (Article 6, paragraph 1, letter a of the GDPR)

If you have given us your consent to process your personal data, this consent is the legal basis for the processing stated there. This applies in particular to your consent to receive the Newsletter and information on products and events.

You can revoke your given consent at any time with effect for the future by sending an e-mail to datenschutz@human-solutions.com. This also applies to declarations of consent that you issued to us prior to the validity of the GDPR, i.e. before May 25, 2018. The revocation only affects future data processing.

c) Fulfillment of legal obligations (Article 6, paragraph 1, letter c of the GDPR)

We are subject to various legal obligations (e.g. tax laws, the law concerning companies with limited liability, the German Commercial Code), the fulfillment of which may require the processing of your personal data.

d) Balancing of interests (Article 6, paragraph 1, letter f of the GDPR)

We may also use your data on the basis of a balance of interests to protect the legitimate interests of our company. This is done for the purposes of customer contact, in particular for contact by telephone and sending information by post or e-mail. To maintain customer relations, it may be appropriate to store your personal data in order to better respond to your requests, to inform you about our offers, which are useful for your business activities, or to improve our products and services.

You have the right to object at any time (Article 21 GDPR) to the processing of personal data concerning you on the basis of a balance of interests pursuant to Article 6 (1) (f) of the GDPR for reasons arising from your particular situation. If you object, we will no longer process your personal data, unless we can prove compelling reasons worthy of protection for the processing, which outweigh your interests, rights and freedoms, or that the processing serves to assert, exercise or defend legal claims.

As far as we process your data in the context of the legal regulations for direct advertizing and you make use of your right to object at any time to the processing of personal data concerning you for the purpose of such advertizing, we will no longer process your personal data for these purposes.

The objection can be filed form-free via the e-mail address datenschutz@human-solutions.com.

4. Recipients

Human Solutions GmbH is a company based in Germany and a member of the Human Solutions Group. The current members of the Group in Germany are:

  • Human Solutions Verwaltungs GmbH, Europaallee 10, 67657 Kaiserslautern, Germany
  • Human Solutions GmbH, Europaallee 10, 67657 Kaiserslautern, Germany
  • Avalution GmbH, Europaallee 10, 67657 Kaiserslautern, Germany
  • AVM Solutions GmbH, Europaallee 10, 67657 Kaiserslautern, Germany
  • Assyst GmbH, Max-Planck-Str. 3, 85609 Aschheim-Dornach, Germany

The data provided by you (cf. § 2 above) will be stored in our centralized customer database in Germany and passed on within the German companies of the Human Solutions Group for the purpose of contract processing and/or to safeguard our own legitimate business interests such as advising and supporting our customers and product design in line with requirements (e.g. sales and marketing, accounting, system administration). These bodies are obliged to maintain data secrecy. In addition, public authorities may receive your data if they are legally or officially obliged to do so.

5. Further data protection rights

You can assert the following claims under the respective legal requirements:

  • Right to information about the personal data stored with regard to your person (Art. 15 of the GDPR, § 34 of the BDSG (FDPA, Federal Data Protection Act) in the version valid from May 25, 2018)
  • Right to immediate correction of incorrect or incomplete personal data (Art. 16 GDPR)
  • Right to immediate deletion of personal data, especially if the purposes for which it was collected are no longer necessary, if the consent for processing is revoked and there is no other legal basis for processing, or the data was processed unlawfully (Art. 17 GDPR, § 35 FDPA)
  • Right to limitation of processing (Art. 18 of the GDPR)
  • Right to data transferability, i.e. the right to receive personal data concerning you in a structured, current and machine-readable format and to transmit this data to another person in charge (Art. 20 of the GDPR), provided that the data processing is based on your consent or is necessary to execute a contract.

You may exercise these rights at any time by sending an e-mail to datenschutz@human-solutions.com.

You also have a right of appeal to the Data Protection Authority (Art. 77 of the GDPR, § 19 of the FDPA).

6. Duration of storage

If necessary, we process your personal data for the duration of our business relationship, which also includes the initiation and processing of a contract.

We are also subject to various storage and documentation obligations, which result, (inter alia), from the German Commercial Code and the German Tax Code. The periods for storage and documentation specified there range from two to ten years.

Ultimately, the storage period is also assessed according to the statutory limitation periods, which, for example, can generally amount to three years, but under certain circumstances can also amount to periods of up to thirty years according to §§ 195 ff. of the German Civil Code.

7. Right of appeal

If you believe that the processing of your personal data by us does not comply with data protection regulations, you have the right to appeal to the competent supervisory authority.

8. Provision of personal data by you

In the context of our business relationship, you must only provide personal data which is necessary for the fulfillment of an order, or for the establishment, execution and termination of a business relationship, or which we are legally obliged to collect.

Without this data we will usually have to refuse to carry out an order or conclude a contract, or we will no longer be able to carry out an existing contract or may have to terminate it.

9. Cookies

Our website uses cookies which serve to make surfing the Internet more user-friendly. Personal data will not be collected.

The storage of cookies can be switched off in the settings of your browser.

10. Google Analytics

This website uses Google Analytics, a web analysis service of Google Inc (“Google”). The use of Google Analytics is based on Art. 6 (1) (f) of the General Data Protection Regulation (GDPR). Google Analytics uses “cookies”. These are text files placed on your computer to help the website analyze how users actually use the site. The information generated by the cookie about your use of this website such as

  • the browser type/version,
  • the operating system used,
  • the referrer URL (the previously-visited page),
  • the host name of the accessing computer (IP address)
  • and the time of the server request

is usually transferred to a Google server in the USA and stored there. The IP address transmitted by your browser to Google Analytics is not merged with other Google data. We have also added the “code anonymizeIp” to Google Analytics on this website. This guarantees that your IP address is masked, so all data is collected anonymously. Only in exceptional cases is the full IP address transmitted to a Google server in the USA, but it is truncated there before evaluation.

On behalf of the operator of this website, Google will use this information to evaluate your use of the website, to compile reports on website activity and to provide the website operator with other services relating to website and Internet use. These purposes are also in line with our own legitimate interest in data processing within the meaning of Art. 6 (1) (f) of the GDPR. The data sent by us and linked with cookies, user IDs, or advertising IDs is automatically deleted after 14 months. When the retention deadline of specific data has been reached, it is automatically deleted once a month.

You can refuse the use of cookies by selecting the appropriate settings on your browser; however, please note that if you do this you may not be able to use all the functions of this website.

You can also prevent Google from collecting the data generated by the cookie and relating to your use of the website (including your IP address) and prevent Google from processing this data by downloading and installing the browser plug-in available at the following link  (http://tools.google.com/dlpage/gaoptout?hl=de).

You can also prevent Google Analytics from collecting data by clicking on the following link. An opt-out cookie is set to prevent future collection of your data when you visit this website: Click here to opt out of Google Tag Manager data capture. The opt-out cookie is stored on your device and is only valid in this browser and only for our website. If you delete the cookies in this browser, you must reset the opt-out cookie.

For more information about terms of use and privacy, visit http://www.google.com/analytics/terms/de.html  or  https://www.google.de/intl/de/policies/.

The use of Google Analytics serves web analysis for the improvement of our offer and our web presence. Since the private sphere of our users is important to us, the user data is anonymized. A contract for order data processing has been concluded with Google.

Google is also certified to participate in the Privacy Shield Agreement.

Dates

  I would like to make an individual appointment

Login

Dates

  I would like to make an individual appointment

Hauptnavigation

 

 

 

 

Dates

  I would like to make an individual appointment

Engineering as a Service

Ergonomics from A to Z

Choose one of our study packages to take your product forward in comfort, ease of use and safety – and of course you can also examine specific issues together with us.

Dates

  I would like to make an individual appointment

CaseStudies

BMW: The car ... an everyday living environment

When a customer enters his (future) car, he expects a lot – and the brand must keep its promise, also in terms of comfort and safe operation. This is why ergonomics is a core competence for BMW.

 

Dates

  I would like to make an individual appointment

RAMSIS Defense Module

What RAMSIS Defense will do for you…

Dates

  I would like to make an individual appointment

RAMSIS Automotive

With RAMSIS Automotive you can...

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

Special features of RAMSIS Industrial Vehicles

 

Dates

  I would like to make an individual appointment

RAMSIS Bus & Truck Module

With RAMSIS Bus & Truck you will achieve...

Dates

  I would like to make an individual appointment

RAMSIS User Conference

RAMSIS User Conference from 29. - 30. October 2019 at the
Dorint Hotel Dresden

ELECTROMOBILITY – a topic for vehicle ergonomics?

Dear RAMSIS User,

The automotive industry is electrified! The topic of electromobility is dominating the development plans of companies – and politicians and the media have also tuned into this climate-friendly, sustainable form of transport.

At the RUC 2019, we want to explore how electromobility is changing our vehicles, and we’ll be asking the question, “Will this have an impact on vehicle ergonomics?” We’ll also be presenting the latest RAMSIS developments and gaining some insights into the ongoing projects of our customers.

Another highlight will be the visit to the "Gläserne Manufaktur" in Dresden.

A detailed program with all the topics and speakers will be available in September here.

We’re looking forward to your registration – see you in Dresden!

Dates

  I would like to make an individual appointment

Documentation

Order the required documentation now

You will receive these immediately by e-mail

Dates

  I would like to make an individual appointment

RAMSIS Excellence Award

Prize

The RAMSIS Excellence Award is awarded for the best scientific project and has a total prize money of €1,500.

BEST SCIENTIFIC PROJECT

Doctoral thesis

1.000 EURO

BEST NEWCOMER OF THE YEAR

Master, Bachelor, Diploma thesis

500 EURO

 

A jury consisting of representatives from science and industry will evaluate the rankings of the submitted projects and select the winners. The jury will meet behind closed doors.

Decision criteria for the evaluation of the projects are:

  • Scientific niveau
  • Technical applicability and relevance for actual practice
  • Degree of innovation

Dates

  I would like to make an individual appointment

Footer

Publisher

Human Solutions GmbH
Europaallee 10
67657 Kaiserlsautern, Germany
Tel.: +49 631 343 593 00
Fax: +49 631 343 593 10
E-Mail: contact@human-solutions.com

CEO: Dr. Andreas Seidl

Commercial register: Amtsgericht Kaiserslautern, HRB 3636

VAT identification number pursuant to §27a of the German VAT law:  DE813491577

Person responsible for content pursuant to §55, para. 2 of the Interstate Broadcasting Agreement:  Alexandra Seidl, Europaallee 10, 67657 Kaiserslautern

Notice of liability

For content

As a service provider, we are responsible for our own content on these pages, pursuant to §7, Para. 1 of the German Telemedia Act (TMG) and to general laws. However, pursuant to §§8 to 10 of the TMG, we as service providers are not obliged to monitor transmitted or stored third-party information or to investigate circumstances that indicate illegal activity. Obligations to remove or block the use of information in accordance with general laws remain unaffected by this. However, liability in this respect is only possible from the time of knowledge of a concrete violation of the law. As soon as we become aware of such violations, we will remove the offending content immediately.

For links

Our website contains links to external websites of third parties. Since we cannot influence the content of these websites, we cannot assume any liability for such content. The respective provider or operator of these pages is always responsible for the contents of the linked pages. The pages were checked for possible legal infringements when they were linked and no illegal content was detected at that time. However, permanent monitoring of the linked pages’ content is unreasonable without concrete evidence of a violation of the law. If we become aware of any such violation, we will remove the relevant links immediately.

Copyright

The content and works presented on this website are subject to copyright and other laws for the protection of intellectual property and may not be republished, retransmitted, reproduced or used in any other way. The copyrights of third parties are addressed in the case of content on this page (e.g. third-party picture material) that was not provided by the site operator. Nevertheless, if you become aware of a copyright infringement, please inform us accordingly. We will then immediately remove the content in question when we become aware of the infringement.

If you have any questions or suggestions about the website, please send an e-mail or write to:

Human Solutions GmbH
Europaallee 10
67657 Kaiserlsautern, Germany
Tel.: +49 631 343 593 00
Fax: +49 631 343 593 10
E-Mail: contact@human-solutions.com

Dates

  I would like to make an individual appointment

Suchergebnisse

Dates

  I would like to make an individual appointment

Hauptnavigation

Engineering as a Service – your path to the best possible products

There are two paths that lead to high-performance ergonomics. You can either use RAMSIS directly in your product development process, or you can get support from our team of experts during peak periods to clarify specific questions or implement innovative concepts.

Dates

  I would like to make an individual appointment

Press

Human Solutions will participate in the Eurosatory trade fair in Paris from June 11 to 15, 2018 as part of a joint German booth. The company will present the RAMSIS Defense ergonomic software solution and a digitalized solution approach for military clothing using 3D body scanners.

Vehicles used for military purposes have special ergonomic requirements. Certain items of clothing or equipment, for example, must be taken into account when persons enter or exit the vehicle, or a specific space must be reserved for their transport. Vehicle designers can use the RAMSIS digital manikin for this – it provides important information for optimal ergonomic interior design as early as the development phase. The RAMSIS Defense module addresses the special requirements of the military and Human Solutions will be presenting it at the Paris show.

Simulation of the entry and exit wearing combat gear

“The module has an extensive library of military items and equipment,” says Anton Preiss, Director Mobility at Human Solutions. “Our digital manikin can be equipped with these items to simulate vehicle entry and exit in full combat gear.”

Digitalizing and optimizing the garment process

The Human Solutions trade fair team will also be taking along a fashion sector solution: “We have used our know-how in 3D body scanning and corporate fashion to digitalize the process of the initial

clothing process of military personnel. Instead of a recruit being assigned a size visually, he is measured by our body scanner when he enters the army – and he then receives a size recommendation for each individual item of clothing,” explains Preiss. “The collected body dimension data can then be re-used to determine the requirements of individual sizes more precisely, for instance.”

Dates

  I would like to make an individual appointment

Engineering as a Service

Your advantages with Engineering as a Service

Dates

  I would like to make an individual appointment

Newsletter subscribtion

Subscribe to the Newsletter

Stay bang-up-to-date with all the latest news from Human Solutions GmbH. Our Newsletter will tell you when our new releases are available, the events where you can meet our team and much more.

Please enter your e-mail address:

Dates

  I would like to make an individual appointment

RAMSIS Automotive

You’ve come to the right place

Make your vehicles unique with comfortable and safe handling. 

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

Dates

  I would like to make an individual appointment

RAMSIS Bus & Truck Module

You’ve come to the right place

Make your buses and trucks unique with comfortable and safe handling.

Dates

  I would like to make an individual appointment

RAMSIS User Conference

Hotel

A block of rooms has been reserved until 23. September 2019 at the Dorint Hotel Dresden, The keyword is „RUC", and we have secured a special price for you of 91,- Euro per room/night.

Please book your room directly at the hotel:

Dorint Hotel Dresden
Grunaer Str. 14
01069 Dresden
Germany

T: +49 351-4915-0
E: info.dresden@dorint.com
I: www.hotel-dresden.dorint.com

Dates

  I would like to make an individual appointment

Press

Dassault Systèmes and Human Solutions will extend their cooperation to provide vehicle designers with a best in class tool for ergonomic analysis – the Human Solutions digital human model RAMSIS will be accessible on top of the Dassault Systèmes 3DEXPERIENCE platform.

Dassault Systèmes and Human Solutions have entered into a partnership to integrate RAMSIS into the 3DEXPERIENCE platform. RAMSIS is the world’s leading ergonomics tool for the automotive industry when it comes to customizing the interior of vehicles to match the requirements of the driver and passengers as closely as possible. 3DEXPERIENCE is a business experience platform for all Dassault Systèmes software solutions.

Thanks to the integration of RAMSIS in 3DEXPERIENCE, users can access the RAMSIS manikin – and this means that importing and exporting data is no longer necessary and work steps can be carried out more quickly and easily. “3DEXPERIENCE is one of the leading software solutions for vehicle design. Thanks to the integration of RAMSIS NextGen, we can now provide designers with a tool which simplifies the addressing of ergonomic requirements in the design of vehicle interiors”, says Anton Preiss, Director of Ergonomics at Human Solutions.

In practice, this means that users of the platform can perform their ergonomic analyses for vehicle design in the familiar, proven systems and solutions of the 3DEXPERIENCE platform based on the latest geometry, without having to exchange data with an additional stand-alone application. The integration will also involve RAMSIS being used in CATIA, the leading solution for all design and engineering activities, and more particularly in the Transportation and Mobility industry. Designers and Engineers will benefit from the unique value of the integrated CATIA Modeling environment to design, evaluate and validate the best experience for their consumers.

The RAMSIS version that will be integrated into the 3DEXPERIENCE platform is RAMSIS NextGen, which provides more flexibility, efficiency and an outstanding representation of the market. The user also gets results faster, thanks to the parallel observation of several RAMSIS models. Persons with different body shapes and sizes, for example, can easily be virtually placed in the vehicle interior to check their view from the vehicle, to check the belt routing and to determine if they can access various components in the vehicle. The development of the models’ body shapes was based on real, three-dimensional scans.

Dates

  I would like to make an individual appointment

RAMSIS Excellence Award

Award ceremony and presentation

The winners of the RAMSIS Excellence Award will be scheduled to speak at the RAMSIS User Conference. The willingness to participate in the conference is a prerequisite for registering for the Award.

Travel costs or other expenses (e.g. cost of submission) cannot be refunded. The winner will be notified in writing.

Dates

  I would like to make an individual appointment

Presse

Eva Fröhlich
Tel.: +49 (0)631 343 593 73
presse@human-solutions.com

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

Hauptnavigation

Ergonomics from the market leader

Our RAMSIS software combines real 3D populations with precise ergonomic functionality. Our consulting team will help you with method competence in every question and show you new ways in ergonomics. Perfect for your development processes.

Dates

  I would like to make an individual appointment

Press

What will drivers actually do while their vehicles are being driven autonomously? And how will changes in the driver’s activities affect the vehicle interior, safety and comfort? To answer questions like these, the functions and capabilities of existing digital manikins must be expanded. Human Solutions GmbH, Simi Reality Motion Systems GmbH and the Department of Ergonomics at the Technical University of Munich will be conducting a joint research project on these and other related questions over the next three years.

On July 1, 2018, the INSAA research project (vehicle occupant simulation in automated automobiles) was launched with the aim of further developing the RAMSIS digital human model to meet the requirements of automated driving for the driver. “In the vehicle industry, the classic driver’s seat is currently being optimized for the ergonomic execution of the driving task, primarily with the aid of digital manikins,” says Project Coordinator Dr. Hans-Joachim Wirsching of Human Solutions. This will also change the interior of the vehicle – and these changes must take ergonomic issues into account.”

RAMSIS, the digital manikin by Human Solutions, has been used for the ergonomic design of vehicle interiors for the past 30 years – and it has so far been geared towards the primary driving task in conventional vehicle concepts, with the focus on comfort issues and on safety aspects like belt routing and visual field analyses. “We intend to expand the capabilities of RAMSIS through the INSAA project. In future, the postures and movements of RAMSIS will also include activities outside the vehicle, such working with a tablet,” explains Philipp Russ, CEO of Simi Reality Motions Systems. “To achieve this, we’ll be carrying out tests during which real occupant behavior is recorded with several cameras, and thereby measured in a contact-free manner. The results will then be transferred to RAMSIS.”

Exactly how the interior of automobiles will look in the future is still uncertain: “Various concepts are conceivable today. The degree of automation of a vehicle specifies the degree to which the occupants are involved in driving, and consequently the activities that can be carried out during the journey. In our research project, we will be focusing on enabling the use of the digital manikin to ergonomically test and validate these concepts,” says Professor Klaus Bengler of the Technical University of Munich.

This means, for example, that RAMSIS will ensure that all instruments which are relevant for the occupants are clearly visible and accessible in the future. Safety aspects such as belt routing will also be re-addressed to take the changes in the vehicle interior into account.

PROJECT PARTNERS

Human Solutions GmbH, Kaiserslautern

Overall coordinator, development partner; specification of industrial and technical requirements for tool development, development of simulation methods, integration of occupant behavior data, implementation into the 3D environment, validation and optimization of simulation methodology and the application of the demonstrator.

Simi Reality Motion Systems GmbH, Unterschleissheim, Germany

Development partner; planning, creation and implementation of markerless and hybrid motion capture methods for the creation of simulations and for use as a real-time occupant information system in autonomously-driven vehicles.

Technical University of Munich – Chair of Ergonomics, Garching

Research partners; specification of application scenarios, research into activities not related to driving and determination of selected postures to be studied; construction of a test station; research into occupant behavior; test person study; support in the development of simulation methodology, validation of simulation methodology.

PATRON

SME-innovative: ICT

The “INSAA” project is an example of the promotion of innovative small and medium-sized enterprises (SMEs). The “SME innovative” initiative by the German Federal Ministry of Education and Research has set up a “fast track” for SMEs, which can now submit their project ideas in the field of information and communication technologies at any time – and receive preferential support through simplified funding and accelerated approval procedures. The aim is to mitigate innovation risks for SMEs and to support these SMEs with top performance in the high-tech sector.

Dates

  I would like to make an individual appointment

Engineering as a Service

Impetus, ideas, manpower

Turn ergonomics into your competitive advantage

Operability, comfort and safety are the key factors for the market success of products. Integrating ergonomics in product development from planning right through to series production places high demands on competence, processes and resources. Together with our experts, you can break new ground, secure highly qualified competence at peak times and significantly improve your overall performance. This is no exaggeration. After all, we’ve proven it many times before.

Dates

  I would like to make an individual appointment

RAMSIS General

What makes RAMSIS so special?

Dates

  I would like to make an individual appointment

RAMSIS Automotive

NEU!! Cognitive / Virtual Aging

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

Best practice with RAMSIS in commercial vehicles, heavy machines and tractors

Dates

  I would like to make an individual appointment

RAMSIS Bus & Truck Module

Modern ergonomics concepts

Easing of the workload and more driving safety for professional drivers

Truck and bus drivers must remain constantly alert and be able to react quickly. Anyone who sits in a vehicle for 8 hours or more a day needs special ergonomic concepts to stay healthy and fit. With RAMSIS, you can implement the necessary ergonomics concepts to achieve this. The Bus & Truck module supplements the RAMSIS software with a special driver database and best-in-class functions for optimizing the levels of attention, comfort and safety of professional drivers.

Dates

  I would like to make an individual appointment

RAMSIS User Conference

Contact

If you have any questions or need help with organizational matters, please contact
Alexandra Lang at
+49 (0)631 343593 52 or mail her at
alexandra.lang@human-solutions.com.

Dates

  I would like to make an individual appointment

Blog

Dassault Systèmes and Human Solutions will extend their cooperation to provide vehicle designers with a best in class tool for ergonomic analysis – the Human Solutions digital human model RAMSIS will be accessible on top of the Dassault Systèmes 3DEXPERIENCE platform.

Dassault Systèmes and Human Solutions have entered into a partnership to integrate RAMSIS into the 3DEXPERIENCE platform. 3DEXPERIENCE is a business experience platform for all Dassault Systèmes software solutions.

Thanks to the integration of RAMSIS in 3DEXPERIENCE, users can access the RAMSIS manikin – and this means that importing and exporting data is no longer necessary and work steps can be carried out more quickly and easily. This means that users of the platform can perform their ergonomic analyses for vehicle design in the familiar, proven systems and solutions of the 3DEXPERIENCE platform based on the latest geometry, without having to exchange data with an additional stand-alone application. The integration will also involve RAMSIS being used in CATIA, a program for the development of construction machinery and commercial vehicles. Designers and Engineers will benefit from the unique value of the integrated CATIA Modeling environment to design, evaluate and validate the best experience for their consumers.

The RAMSIS version that will be integrated into the 3DEXPERIENCE platform is RAMSIS NextGen, which provides more flexibility, efficiency and an outstanding representation of the market. The user also gets results faster, thanks to the parallel observation of several RAMSIS models. Persons with different body shapes and sizes, for example, can easily be virtually placed in the vehicle interior to check their view from the vehicle, to check the belt routing and to determine if they can access various components in the vehicle. The development of the models’ body shapes was based on real, three-dimensional scans.

Dates

  I would like to make an individual appointment

RAMSIS Excellence Award

 

 

 

Dates

  I would like to make an individual appointment

Footer

Human Solutions Verwaltungs GmbH is a company based in Germany. It is the parent company of the Human Solutions Group. The current members of the Group of companies in Germany are:

 

  • Human Solutions Verwaltungs GmbH, Europaallee 10, 67657 Kaiserslautern,
    represented by the CEO Dr. Andreas Seidl
    Phone: +49 631/343590-30; E-Mail: contact@human-solutions.com

 

  • Human Solutions GmbH, Europaallee 10, 67657 Kaiserslautern,
    represented by the CEO Dr. Andreas Seidl
    Phone: +49 631/343593-00; E-Mail: contact@human-solutions.com

 

  • Avalution GmbH, Europaallee 10, 67657 Kaiserslautern,
    represented by the CEO Dr. Andreas Seidl
    Phone: +49 631/343590-10; E-Mail: contact@avalution.net

 

  • Assyst GmbH, Max-Planck-Str. 3, 85609 Aschheim-Dornach,
    represented by the CEO Dr. Andreas Seidl
    Phone: +49 89/90505-0; E-Mail: contact@assyst.de

 

  • AVM Solutions GmbH, Europaallee 10, 67657 Kaiserslautern,
    represented by the CEO Dr. Andreas Seidl
    Phone: +49 631/343590-0; E-Mail: info@avm-solutions.de

Dates

  I would like to make an individual appointment

Kontakt

It will be sent regularly to your email address from now on.


To prevent the Newsletter from being unintentionally moved to your Spam folder, please enter our return address in your personal address book.

Best regards

Assyst GmbH

Dates

  I would like to make an individual appointment

Hauptnavigation

Comfort and safety in the green zone

Comfort and safety go hand-in-hand. Products like automobiles, trucks, commercial vehicles and aircraft have today become working and living spaces. Fine-tuning for movement sequences, operability and comfort play an important economic role here – and ergonomics and new 3D test populations from Human Solutions will put your products on the path to perfection.

Dates

  I would like to make an individual appointment

Press

A soldier must be able to move freely and react fast to all kinds of situations – despite bulky protective clothing and equipment. This is why the interior design must be perfect in the tight spaces inside the vehicle, because just a few millimeters can become a safety factor. The digital manikin RAMSIS – now ready for use in military vehicles.

RAMSIS is a digital manikin used worldwide by leading car manufacturers for the optimal ergonomic design of vehicle interiors – and it can now enter and exit a vehicle in full combat gear, equipped with the most important, up-to-date army equipment. This provides vehicle designers with information on the ergonomic requirements of the occupants at an early stage of development, ensuring shorter development times and reducing the costs for late modifications to the vehicle.

“Ergonomics simulation with RAMSIS Defense provides vehicle designers with the practical relevance they need to precisely analyze and design functionality in the vehicle,” says Anton Preiß, Director Mobility at Human Solutions. “Our manikin can be realistically equipped with protective clothing and equipment. This means that posture, force and consequently the analysis results correspond to actual use.” The limited space available in the vehicle and the additional restrictions of protective clothing and equipment are taken into account at an early stage. “The high degree of practical relevance was very important to us. The RAMSIS Defense module was developed in cooperation with the German Armed Forces and is aimed specifically at ergonomic simulation in emergency vehicles,” says Anton Preiß.

Plan space requirements and posture realistically 

RAMSIS behaves according to the equipment attached and/or worn: In real life, clothing can restrict the mobility of individual body parts – boots can restrict ankle movements, for example, and if a soldier is wearing a helmet, his posture in the vehicle changes because he has to lower his head. These restrictions are automatically addressed in RAMSIS, so the simulation results are especially realistic.

3D equipment library with realistic features

The core of RAMSIS Defense is the integrated equipment library. The most important items of the current equipment of German soldiers such as combat jacket and pants, boots, protective vest, helmet and the newly-introduced electronic back were digitized with 3D scanners and integrated into the equipment library. The RAMSIS Manikin can be equipped as required to suit the intended use.

Dates

  I would like to make an individual appointment

Engineering as a Service

You’ve come to the right place!

Make ergonomics your decisive competitive factor.

Dates

  I would like to make an individual appointment

RAMSIS General

  Ergonomic simulation

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Icons

Scientifically validated data on body measurements and behavior

Dates

  I would like to make an individual appointment

RAMSIS Automotive

Interior development & early product maturity

New concepts for space and comfort – with no subsequent reworking

Passengers, instruments and stowage space in passenger cars always have to be accommodated in an ever-diminishing amount of space – but the vehicle still has to boast the best possible level of comfort! With RAMSIS, you can perfectly implement new concepts ergonomically and achieve a high level of product maturity as early as the CAD model stage. The leading ergonomics software reduces your development costs and your time to market.

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

 

 

 

 

 

Dates

  I would like to make an individual appointment

RAMSIS User Conference

Registration fee

The registration fee for the two-day event – including the supporting program – is €499 per person plus VAT. If another employee from the same company participates, he or she will receive a 10% discount.

The following services are included in the registration fee:

  • Participation in the RAMSIS User Conference 2019
  • 2-day event incl. food and drinks
  • Congress documentation
  • The supporting programme

Dates

  I would like to make an individual appointment

Blog

The end of October saw our annual RAMSIS User Conference (RUC) take place in Dresden for the first time. The focus this year was on electromobility and the question of how it affects ergonomics in the vehicle and one of the highlights was a visit to the Volkswagen Transparent Factory.

Dr. Stefan Bratzel kicked off the Conference this year with a keynote lecture on the opportunities provided by electric mobility and the challenges involved. During the subsequent panel discussion, it became clear that there are still many unanswered questions, mainly concerning the necessary infrastructure and battery technology. However, a visit to the Volkswagen Transparent Factory with test drives afterwards showed what is already possible today. Our conclusion? Ergonomics will play a role in the further development of electric mobility, especially when it comes to new mobility concepts such as car sharing – because when many different people share vehicles, the interior design of these vehicles has to be more flexible.

Once again, the RUC provided numerous insights into our customers’ and partners’ current RAMSIS projects, plus those of our own team. One important topic for Human Solutions is the expansion of our own portfolio to include “Ergonomics as a service”, since we considerably expanded our consulting services last year. With the presentation of the RAMSIS Excellence Award, Human Solutions honored two young scientists for their research in 2019.

“The RUC was once again an important source of inspiration for us, says Anton Preiß, Director of Ergonomics. “As a service provider, we want to help our customers with their challenges in the best possible way. At the RUC we get a real insight into current projects and we also discuss issues much more intensively than we can during appointments in everyday life. We’re already looking forward to next year!”

Dates

  I would like to make an individual appointment

RAMSIS Excellence Award

Conditions of participation

  • The RAMSIS Excellence Award (REA) addresses ergonomics students, scientific staff and docto- rate students whose main study focus is on vehicle interiors or cockpit design (interior).
  • In its broadest sense, the submitted project must concern the design of vehicles, but it may also cover the cognitive intake and processing of information, themes related to anthropo- metry and the analysis of comfort and driver models.
  • The submitted project may be (but need not be) a study carried out with the ergonomics tool RAMSIS (e.g. mirror design for a particular vehicle).
  • Projects subjects can range from passenger cars and industrial vehicles to buses, trucks, heavy machinery, racing cars and aircraft.
  • The project must meet the requirements for high-quality scientific work.
  • At the time of submission, the project must fulfill the following requirements:
  1. it must not be older than 2 years.
  2. It must not be currently participating in another competition, or it must not already have won an award in another competition.
  3. It must not already have been presented at a previous RAMSIS User Conference.
  • If the submitted project was created within the context of a project carried out on behalf of third parties, or if it was created by several participants, the approval of any other creators/ authors and/or the participant’s usage rights must be explicitly confirmed, or ensured as a condition of participation.

Dates

  I would like to make an individual appointment

Hauptnavigation

Dates

  I would like to make an individual appointment

Footer

Strict adherence to data protection is a matter of course for the Human Solutions GmbH and its affiliates. We require your explicit consent for the storage and use of your data due to the new data protection regulations which will come into force from May 2018. We therefore ask you to give us your consent so that in future we can keep you up-to-date with our Newsletter and with information about our events, our company and our products by post, fax or e-mail and also contact you by telephone.

In the event of your consent, we will store your data (first and last name, name and address of the company you work for, your e-mail address, telephone and fax number if applicable, and only if specified by you) in our centralized customer database in Germany and use it within the German companies of the Human Solutions Group for the stated purposes. Public authorities may also receive your data if appropriate legal or official obligations exist.

I agree

1. that I may receive information by mail, fax or e-mail through Newsletters, event information and product information and

2. that I may be contacted by telephone for information purposes and

3. that my personal data (first and last name, e-mail address and telephone and fax number where applicable) is stored for these purposes.

Data processing above and beyond these purposes will only take place if it is required by law, or if you have given your separate consent.

You do not have to give your consent. It is absolutely voluntary and can be revoked at any time with effect for the future by sending an e-mail to datenschutz@human-solutions.com. Processing remains legal until the time of revocation.

Provided there are no legal obligations to the contrary, your personal data will be deleted as soon as it is no longer required for the fulfilment of the above purposes, and in particular after revocation of your consent.

In all other respects, please refer to the data protection declaration.

Dates

  I would like to make an individual appointment

Kontakt

Dear Subscriber,

Your email address has been successfully removed from our Newsletter mailing list.

Best regards,
Assyst GmbH

Dates

  I would like to make an individual appointment

Hauptnavigation

You’ve come to the right place!

Make your products unique with comfortable, simple and safe handling.

Dates

  I would like to make an individual appointment

Blog

The Deep Orange program at Clemson University in South Carolina/USA enables students to develop a vehicle prototype within two years. It’s a unique program that accompanies the students from the initial idea to the finished vehicle. Ergonomic comfort and safety are tested using RAMSIS in Catia V5.

All Automotive Engineering students have the opportunity to participate in the Deep Orange program. There are five different student teams: Powertrain, Body, Interior, Body-in-White and Project Management. The selection process also prepares students for their future occupations, because they have to apply for Deep Orange just as they would for a real job. “The students all understand the commitment they’re making. We can assess their interest realistically”, says Professor Johnell Brooks in an interview with our ‘KomfortZone’ customer magazine. Sponsors support the projects and usually provide a rough orientation of what should be developed – an ‘urban commercial vehicle’, for instance. One special result achieved during one implementation timeframe was the development of a 3+3 seating concept in a hybrid sports car.

RAMSIS is used intensively for project work, for visual analysis, for example, and for the accessibility of instruments. “RAMSIS has shown our teams a clear way to test their concepts,” says Brooks. It has proved to be an absolute winner for the outstanding Clemson University project, which has a clear advantage over the competition for the best jobs in the automotive industry.

Dates

  I would like to make an individual appointment

Engineering as a Service

Dates

  I would like to make an individual appointment

RAMSIS General

3D Manikin & Ergonomics Simulation

Highly efficient development on the digital model

RAMSIS is the world’s leading 3D CAD manikin. It realistically simulates vehicle occupants and analyzes the ergonomics of interiors, allowing you to ensure a high level of product maturity and already save on physical prototypes during the early development of your products on the CAD model.

Dates

  I would like to make an individual appointment

RAMSIS Automotive

So starten oder erweitern Sie RAMSIS Automotive

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

The vehicle as a tool

In the case of commercial vehicles, the focus is always on the actual task at hand – and when the vehicle becomes a tool, the vehicle guidance must be ergonomically perfect.

Dates

  I would like to make an individual appointment

Blog

We are always on the move, no matter where we are – but our freedom of movement is severely restricted in narrow spaces, such as in a vehicle. This is why the interior design of a vehicle should be matched to our usual movement sequences. It must also address ergonomic requirements – and that is particularly important when it comes to safety-related movements that require a rapid and undisturbed reaction.

The necessary movement studies for protecting ergonomics are being physically completed at the time of writing. To date, these tests have been carried out using complex models of the cabin with test persons, but procedures like this are both time-consuming and cost-intensive – so a digital solution has to be found. Human Solutions aims to achieve this with the DELFIN research project (Dynamic Evaluation of Vehicle Passengers), which will expand the functionality of the company’s RAMSIS digital manikin, enabling it to perform dynamic analyses.

The Advanced Realtime Tracking Company is also involved in the DELFIN research project, during which it will continue to develop its existing motion capture systems to combine comfort, minimize rework and deliver maximum precision, eventually offering the ergonomics market a trailblazing level of motion capture quality. The Institute of Mechatronics at Chemnitz University of Technology will also use this system to collect necessary movement data, which will be used in turn by the Chair of Ergonomics at the Munich University of Technology to create the relevant evaluation models.

The ultimate aim of the project is to implement a technology for predicting and evaluating the movements of vehicle occupants into the digital manikin RAMSIS. Using a library of measured movements, RAMSIS users will then be able to automatically calculate vehicle occupants’ movements and interactively manipulate and assemble them.

This technology will be used in the development of cars, trucks, airplanes and agricultural & construction machinery, then validated in various truck & car applications during the project.

The joint project DELFIN is funded by the Federal Ministry of Education and Research within the framework of the “KMU-innovativ” program. Launched on May 1, 2019, it will run until April 30, 2022.

 

Dates

  I would like to make an individual appointment

Blog

At this year’s RAMSIS User Conference (RUC), Human Solutions once again presented the RAMSIS Excellence Award to young scientists for their outstanding scientific work in ergonomics and vehicle interior design.

This year, two RAMSIS Excellence Awards were presented for master’s theses, each endowed with prize money of €500. Steffen Schynoll received the award for his thesis entitled, the “Evaluation of a Variable Ergonomics Test Bench for Trucks”, which he compiled in the Ergonomics Department at the Technical University of Munich. Luka Thaler from the Koblenz University of Applied Sciences (Rhein-Ahr Campus Remagen) received the award for his work entitled, “Spinal column and pelvis position in the driving position of passenger cars – a development of anthropometric and cross-vehicle posture schemes for computer-aided occupant simulation.” This thesis completed his studies in sports medicine technology.

The focus at the RUC is on the exchange of information about working with RAMSIS. Ergonomics experts from companies report on their projects and Human Solutions employees present their latest developments, all of which adapt the digital manikin to master an increasing number of new requirements. The RAMSIS Excellence Award combines research and practice in the field of ergonomics and shows the tasks with which university students are confronted.

Dates

  I would like to make an individual appointment

Kontakt

How much can your product benefit from this?

Our leading experts will advise you without obligation.



Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

Closely networked with customers and partners

The RAMSIS community is large – and ergonomics managers and RAMSIS experts are actively involved in it, continuously developing RAMSIS and exchanging new findings. The main event of the RAMSIS Community is the RAMSIS User Conference, at which the RAMSIS Award for young academics in ergonomics is also presented.

Dates

  I would like to make an individual appointment

Hauptnavigation

Watch your vehicles get better and better

Simple, safe and comfortable handling – that’s what you’ll achieve through digital ergonomics with Human Solutions. Innovation and new impulses will take you further.

Dates

  I would like to make an individual appointment

Blog

China is the largest car market in the world – and it’s beginning to change from a sellers’ to a buyers’ market, because even established brands are being challenged to prove their quality. A large number of Chinese OEMs now rely on RAMSIS – and Human Solutions has been represented by its reliable service partner Beijing Jiangda Technology in China for more than ten years now.

Requirements in China’s car market differ from those in Germany or the USA, both in terms of socio-economic factors and the anthropometric characteristics of the vehicle occupants. Even with identical body heights, the proportions of East Asians and Europeans differ considerably. The torsos of East Asians are longer, but their legs are substantially shorter than those of Europeans. In vehicle interior design, this not only affects visual comfort, but also factors for safe operation, such as when pedals have to be reached easily.

Thanks to relevant RAMSIS test collective samples, Chinese customers’ requirements can be simulated in the early development phase. Many OEMs have chosen the digital manikin, because it provides significant support for the product development process, helping to achieve the desired ergonomic quality quickly and cost-effectively.

Beijing Jiangda Technology has represented Human Solutions in China since 2005. The partner company combines professional services with solidly-based technological competence. Its customers are mainly from the automotive, aviation and mechanical engineering industries. “The cooperation with our colleagues from Beijing Jiangda is extremely effective and solution-oriented. RAMSIS users in China are given the best possible support and this is also reflected in the increasing usage skills of our customers and the constant number of new project enquiries,” says Susanne Kiel, Senior Manager Partner Sales at Human Solutions. More than 40 companies in China now use RAMSIS for their design processes – and this trend is on the rise.

Dates

  I would like to make an individual appointment

RAMSIS General

Integrate RAMSIS into your development process

Make your products unique – through comfortable, simple and safe handling.

Dates

  I would like to make an individual appointment

RAMSIS Automotive

„We make automobiles that integrate themselves naturally into the lives of our customers. For us, ergonomics is part of an overall picture.“

Peer-Oliver Wagner, Head of Ergonomics and Comfort at the BMW Group

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

You’ve come to the right place

Make your machines unique with comfortable and safe handling.

Dates

  I would like to make an individual appointment

Function modules

Improve vision & perception with the RAMSIS Cognitive module

Better vision   Optimal display design   Fast testing of new concepts  

New display concepts must be carefully analyzed. The RAMSIS Cognitive module allows you to extend the visual analysis in RAMSIS to include readability and the minimum visual range of information. This RAMSIS module shows how well the information can be read on road signs, for example – depending on the display, lighting conditions, positioning and other external road traffic conditions. The time needed for gaze changes is also determined.

Dates

  I would like to make an individual appointment

Blog

The RAMSIS User Conference will take place in Dresden on October 29 and 30. The programme for the RUC is still being finalised, but one thing is already clear – a comprehensive overview of the latest RAMSIS developments will be presented to the audience, and we’ll also be covering one of the dominant topics of the industry – electromobility. Will this topic of the future also influence vehicle ergonomics? How will electromobility change our road traffic and our own habits? We want to find answers to questions like these at the RUC. We’ll also be visiting Volkswagen’s ‘Gläserne Manufaktur’ in Dresden to experience electromobility live.

Dates

  I would like to make an individual appointment

Blog

This year again, we’re looking for the best young scientists in the field of ergonomics! 2020 will see the RAMSIS Excellence Award presented by Human Solutions for the thirteenth time. The prize is awarded for scientific work that deals with the topic of vehicle ergonomics in the broadest sense of the term. The RAMSIS Excellence Award is aimed at giving students and scientific staff an insight into the processes of the automotive industry.

You can find all the information about your participation HERE. The winners of the RAMSIS Excellence Award will present their work at the RAMSIS User Conference, where they can make valuable industry contacts.

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

Welcome to Human Solutions!

We are the leading driver for digitization and innovation in ergonomics.

Dates

  I would like to make an individual appointment

Hauptnavigation

Top 5 competitive advantages through digital ergonomics

Dates

  I would like to make an individual appointment

Customers

 

True professionals opt for RAMSIS!

 

Dates

  I would like to make an individual appointment

Blog

Autonomous driving is causing a major stir in the automotive industry – and we at Human Solutions are asking ourselves what will the driver actually do if the vehicle is driving itself? How will changes in driver activity affect vehicle interiors, safety and comfort?

Our research project INSAA (Occupant Simulation in Automated Automobiles) was launched on July 1, 2018 with the aim of further developing the RAMSIS digital human model to meet the requirements of automated driving for motorists. “In the vehicle industry, the classic driver’s seat is currently being optimized for the ergonomic performance of the driving task, primarily with the aid of digital manikins,” says Project Coordinator Dr. Hans-Joachim Wirsching of Human Solutions. “Automated driving means that the driver can turn his attention to other activities.This will also change the vehicle interior – and these changes will also have to address ergonomic issues.”

The functions and capabilities of existing digital manikins must be expanded to answer questions like these and Human Solutions GmbH, Simi Reality Motion Systems GmbH and the Chair of Ergonomics at the Technical University of Munich are researching this together. The joint project will run for 3 years. INSAA is funded by the SME innovativ (ICT) funding measure of the German Federal Ministry for Education and Research (BMBF).

RAMSIS, the digital manikin by Human Solutions, has been used for the ergonomic design of vehicle interiors for the past 30 years – and it has so far been geared towards the primary driving task in conventional vehicle concepts, with the main focus on comfort issues, followed by safety aspects like belt routing and visual field analyses. The INSAA project is aimed at expanding the capabilities of RAMSIS. In the future, the postures and movements of RAMSIS will also include activities outside the vehicle, such working with a tablet. To achieve this, project partner Simi Reality Motion Systems will be carrying out tests during which real occupant behavior is recorded with several cameras and measured in a contact-free procedure. The results will then be transferred to RAMSIS.

Dates

  I would like to make an individual appointment

RAMSIS General

  Simulation of human beings

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

Special features of RAMSIS Aircraft

 

 

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

Safe operability & handling

More productivity and safety on the job

The ergonomic alignment of commercial vehicles – especially in terms of vision and operability – gives your customers greater productivity and safety. If the machine itself can reduce the risk of accidents at work and is easy and safe to operate, this will benefit your customers and your company, because you can push your products in all markets and successfully sell them internationally.

Dates

  I would like to make an individual appointment

Function modules

Ergonomics Extra

Ergonomics precision in special fields

RAMSIS offers comprehensive analysis options for all vehicle ergonomics requirements – and thanks to its modules, the leading ergonomics tool gains even more functionality for areas that require really special ergonomics competence and precision.

Dates

  I would like to make an individual appointment

Press

Every year, the RAMSIS Excellence Award is presented to the best young scientists working on ergonomics in vehicles – the application deadline is July 1, 2019!

Mobility determines our lives. We humans spend a lot of time in vehicles every day. Whether in the car, in a plane, on a train or on two wheels – designing interiors to meet the requirements of the human body are important safety and comfort factors. RAMSIS is the leading digital manikin by the Human Solutions GmbH. It is used worldwide for the interior design of vehicles, making sure that the vehicle ergonomics are perfect for driver and passengers.

For more than ten years now, Human Solutions GmbH has been organizing this competition for talented young people and scientists. “The RAMSIS Excellence Award brings fresh scientific impetus to our RAMSIS User Conference, which is attended by the employees of numerous international vehicle manufacturers who use our RAMSIS ergonomics tool,” says Dr. Andreas Seidl, CEO of Human Solutions GmbH. “The winners will take part in our conference, enabling them to gain a realistic insight into the working world. They also present their projects there and make valuable contacts in the industry.”

What kind of projects can be entered?

The focal themes of submitted projects and theses should pertain to vehicle design in the broadest sense of the word – but they may also address the cognitive assimilation and processing of information, the processing of anthropometrical topics and the analysis of comfort and driver models. The analysis projects should preferably be carried out using the RAMSIS ergonomics tool (e.g. mirror configuration for a specific vehicle), but this is not compulsory. The RAMSIS Excellence Award is aimed at students, doctoral students and scientific staff whose work deals with vehicle interior and cockpit design in the broadest sense of the term. Projects in German or English will be accepted.

What are the prizes that will be awarded?

The REA is presented for the best scientific work in each of two categories: €1,000 will be awarded for the best doctoral thesis and the best scientific project from young science students or graduates (master’s degree, bachelor’s degree or thesis) will receive €500.

Who chooses the winners?

An interdisciplinary jury with representatives from science and industry will adjudge the rankings of the submitted entries. In addition to addressing the scientific standard, the jury will particularly focus on the degree of technical applicability, the relevance to practice and the degree of innovation.

Deadline for applications and the award ceremony

The deadline submission date for entries is July 1, 2019. The prize-giving ceremony for the winners will take place during the annual RAMSIS User Conference. Participation in the RAMSIS User Conference and the willingness to present your own project there is presupposed with the submission of your application. More information and participation documentation can be found here.

Dates

  I would like to make an individual appointment

Blog

A few months ago, Human Solutions passed the ISO 9001:2015 certification process successfully for the first time. At the beginning of July, the German Technical Inspection Authority (TÜV) Rheinland Cert GmbH sent us a communication: “Your company has proven that it meets the requirements of an effective management system,” was the announcement that accompanied the certification process.

Both nationally and internationally, the quality management standard ISO 9001:2015 is the most widespread standard in quality management (QM). It defines the minimum requirements for the quality management system (QMS) that must be implemented in order to meet customer requirements and other important standards for product and service quality. Anton Preiß, Director of Ergonomics at Human Solutions, says, “We’ve documented and supplemented our processes with the help of ‘turtles’. These describe the tasks that must be performed in each process step and the associated marginal conditions, such as the resources that are necessary in order to achieve the relevant result.” The functionality of the management system was randomly checked by a selected audit team. Particular attention was paid to the conformity of the workflows with the standard requirements and the descriptions in the management system documentation. The special features of the entrepreneurial activities and the applicable legal and regulatory requirements, as well as other higher-level documents were also addressed.

The scope of the ISO 9001:2015 covers the development and sale of our digital manikin RAMSIS and its vehicle-specific modules, services for the RAMSIS manikin and the modules and RAMSIS-related services and ergonomic consulting.

 

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

Press

Human Solutions, experts and market leaders in digital ergonomics, and Design Rule, a leading provider of end-to-end digital manufacturing solutions, have today announced their UK partnership naming Design Rule as the sole supplier of RAMSIS in the UK.

Developed by Human Solutions, RAMSIS is the world’s leading 3D CAD manikin. It realistically simulates vehicle occupants and analyses the ergonomics of interiors, allowing you to ensure a high level of product maturity and already save on physical prototypes during the early development of your products on the CAD model.

“We are delighted to be partnering with Human Solutions to provide RAMSIS in the UK.” Commented Adam Bannaghan, Operations Director at Design Rule. “We already work extensively with leading manufacturers to ensure optimal product enhancement at every step of the product lifecycle, from concept through to design, production and beyond – and RAMSIS works seamlessly with the product suite we provide.”

Design Rule’ existing customers are reaping the benefits of utilising digital solutions in the design stage – but predicting how a customer experiences an interior environment has always been difficult before an actual physical product is produced. RAMSIS’ ability to effectively analyse the ergonomics of any interior by realistically simulating a range of potential occupants solves that issue, giving manufacturers far greater earlier insight into their product from the design phase and ultimately reducing the time to market and overall cost.

“Whether in aircrafts, trains, cars, boats, planes or trucks, the vehicle occupants’ perception and experience will directly affect the success of your product. RAMSIS gives you a much greater digital view of this than any other solution available today. This solution should be essential for any company involved in vehicle interior design”, comments Adam Bannaghan.

With its digital manikin RAMSIS, Human Solutions is the world market leader for ergonomic analyses in vehicles and state of the art technology. “We are looking forward to our partnership with Design Rule. I am confident that together we will succeed in raising companies' awareness of vehicle ergonomics and thus contributing to greater safety and comfort for the drivers and occupants”, says Susanne Kiel, Senior Manager Partner Sales at Human Solutions.

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

Leading in R & D

Human Solutions is involved in many international research projects and is strongly committed to the further development of ergonomic simulation and ergonomic field research.

         

Dates

  I would like to make an individual appointment

Hauptnavigation

Weltweit im Einsatz

Dates

  I would like to make an individual appointment

Blog

Parents attach enormous importance to the safety of their children in the vehicle – so when they buy a particular car seat for their child, that’s a real sign of trust in the manufacturer. Until recently, however, the existing belt systems in the vehicle have really been put to the test by children’s seats, but RAMSIS now makes it possible to examine the interaction between the vehicle’s belt system and various child seat models.

RAMSIS can be used to make space forecasts for child seats, for example, to check the suitability of the existing belt system for securing the seat and to test the belt routing over the child in the seat. The simulation works in four simple steps: The child’s seat is loaded from the library and positioned in the vehicle, the RAMSIS child model is placed in the seat and the belt routing is then calculated over the seat and over the model.

The RAMSIS ‘Child Seat’ module is a customer-specific platform that can be individually expanded by child seat models and integrated into RAMSIS as required by the user. RAMSIS also has Q dummies for 6 and 10 year-old children in the child seat.

The RAMSIS Child Seat module was developed in cooperation with Daimler and Britax Römer, the child seat manufacturer. The Britax Römer child seat library is approved for the majority of German OEMs. If you have any questions, please contact our sales department!

Dates

  I would like to make an individual appointment

RAMSIS General

   RAMSIS in the project

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Fakten

"Seats help save money. With 120 seats, a weight of 4 kg per seat saves just under a ton. This saves 43 tons of kerosene per aircraft per year."

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

Best practice in aircraft & helicopters with RAMSIS


Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

Sichtnormen – Normen schon am CAD-Entwurf erfüllen

Dates

  I would like to make an individual appointment

Function modules

Efficient Design of Belt Systems with the RAMSIS Seat Belt Design Suite of Modules

Better belt ergonomics   Compliance with standards = less time and reduced costs   Increased safety  

At an early stage of development, RAMSIS Seat Belt Design ensures that your belt systems are optimized in accordance with ergonomic aspects, that standards are complied with and that safety is increased thanks to the correct functioning of the belt. Digital ergonomics also brings economic advantages to the development stage, since computer simulation eliminates many development steps and time-consuming physical tests – and that means significant time and cost savings.

Dates

  I would like to make an individual appointment

Press

When a vehicle becomes a workplace, it’s well worth making high demands on its ergonomic design. After all, a long working day in the driver’s cab is all about safety, health and as much comfort as possible. In the Fritzmeier booth at the BAUMA in Munich (Hall A6, Booth 327) from April 8 to 11, 2019, Human Solutions will show visitors how the world’s leading digital manikin RAMSIS is used in the development of construction machinery and vehicles.

With RAMSIS, machines can be designed in such a way that they can be fully controlled and monitored at an early stage of development. “This is an important safety aspect, because the machine itself will reduce the risk of costly damage, accidents at work and loss of production if ergonomic requirements have already been taken into account at an early design stage,” says Dr. Andreas Seidl, CEO of the Human Solutions Group.

Ensuring high process quality

RAMSIS also offers important advantages for product development. Thanks to ergonomic analysis at the computer model, you save time and money and ensure high process quality at the same time – because tests carried out with RAMSIS are not weather-dependent, so you can repeat your results at any time and compare the ergonomic aspects of different design options.

The RAMSIS Industrial Vehicles module can be used for ergonomic simulation in construction & heavy machines and in agricultural vehicles. Even as early as the strategy and concept stage, RAMSIS will give you all the solutions to issues that could affect product quality in terms of the comfort and safety of the driver and the operability of the vehicle. When it comes to compliance with visual standards, for example, a separate module ensures that the German Road Traffic Licensing Regulation (StVZO) §35b and the International Standard Organisation (ISO) 5006 standards are addressed at an early stage, especially for construction machinery. “RAMSIS displays the visual fields geometrically in the CAD model, facilitating standard-compliant development by performing checks and corrections on the digital vehicle model,” says Dr. Seidl.

Reproducible ergonomic results

The results of your ergonomic studies can be easily reproduced and transferred to other vehicle models. Thanks to RAMSIS’ virtual ergonomics control, you prevent costly, subsequent developments after the design phase has been completed. Planning and concept errors are prevented and the level of market readiness is well above average as a result, even before the first production series is ready to roll.

Human Solutions will be pleased to welcome you at the BAUMA booth of the Fritzmeier Group (Hall A6, Booth 327).

Dates

  I would like to make an individual appointment

Blog

The security of the data that Human Solutions customers make available for our work is of great importance to us – and we have also been awarded the TISAX certificate for our careful handling of such data.

TISAX stands for Trusted Information Security Assessment Exchange. It is a standard for information security defined by the automotive industry. Many automobile manufacturers and German automotive industry suppliers have increasingly been demanding current TISAX certification from their business partners since 2017.

Human Solutions has passed the test procedure for TISAX. 56 test criteria and requirements in accordance with the VDA ISA catalog were examined in detail by the Rheinland i-sec company for the German Technical Inspection Authority. The certificate was issued in spring 2019 for our Aschheim site, where we provide ergonomic services for an OEM. It will remain valid for three years, after which it will be reissued following an audit.

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

Kontakt

Dates

  I would like to make an individual appointment

About us

Your partner in the market

Companies all over the world work together successfully with us. The result is ergonomically optimized products and processes – and more efficiency and agility in product development.

 

Dates

  I would like to make an individual appointment

Blog

For many years now, Human Solutions GmbH has presented the annual RAMSIS Excellence Award for the scientific work of students, doctoral students or scientific staff who deal with vehicle ergonomics in the broadest sense of the term. July 1 is the deadline for your entries!

Winning projects of the RAMSIS Excellence Award in recent years include a standing seat concept for local public transport, a model for the virtual assessment of boarding and alighting from a vehicle and a simulation of handbrake actuation. “For many students, the competition is a stepping stone into the automotive industry. The winners present their work at our RAMSIS User Conference (RUC), which is attended by employees from the ergonomics departments of vehicle manufacturers from all over the world. Science and practice meet at the RUC,” says Dr. Andreas Seidl, CEO of the Human Solutions GmbH.

You’ll find all the information about the RAMSIS Excellence Award here:

Flyer & Registration

Dates

  I would like to make an individual appointment

RAMSIS General

In-depth functionality for vision, standards, populations and seat design

Special modules allow you to expand the RAMSIS ergonomics analysis in various areas and supplement it with a high degree of ergonomic precision.

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Fakten

"On average, a professional truck driver sits in a vehicle for more than 1,500 hours a year."

Dates

  I would like to make an individual appointment

RAMSIS Aircraft

Dates

  I would like to make an individual appointment

RAMSIS Industrial Vehicles

So starten oder erweitern Sie RAMSIS Industrial Vehicles

Dates

  I would like to make an individual appointment

Function modules

Ihre Möglichkeiten mit RAMSIS Cognitive

Dates

  I would like to make an individual appointment

User Community

Dates

  I would like to make an individual appointment

User Community

Register here

Dates

  I would like to make an individual appointment

Engineering as a Service

Best Practices

Full-service outsourcing, individual studies and real security from our everyday life with ergonomics

Dates

  I would like to make an individual appointment

Ticket system

Support request

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Fakten

"Over 40 percent of all German motorists spend more than an hour and a half in their vehicles every day."

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Optimal reachability

All controls within reach for driver and passengers

Dates

  I would like to make an individual appointment

Aircraft Kacheln 1a

shorter development times

Dates

  I would like to make an individual appointment

F&E

ALLWISS: Working – Learning – LIFE in knowledge work ? Innovative ability in a modern working world.

Human Solutions is a practical partner in the ALLWISS project, which investigates the Work-Learn-Life-Balance as a contribution to the balance between flexibility requirements and stability needs in knowledge work. The lifelong learning and innovation research results are tested by us for practical suitability. ALLWISS is funded by the Federal Ministry of Education and Research (BMBF) and by the European Social Fund (ESF) within the framework of the funding priority program, “Striking a Balance Between Flexibility and Stability in a Changing Working World.” www.allwiss.de

Dates

  I would like to make an individual appointment

Defense Kacheln 2

reduce your development time and costs

Dates

  I would like to make an individual appointment

Bus Kacheln 2

Overweight

Ergonomics design for extremely corpulent persons

Dates

  I would like to make an individual appointment

Links links

Dates

  I would like to make an individual appointment

Bus Kacheln 3

reduced driver fatigue

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln

Seat adjustment area

optimal adjustment ranges for international driver collectives

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 1a

Simulation of human beings

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 3

Project support & documentation

RAMSIS reflects the project-oriented perspective in modern development: The project, test collective/filter, examination or role can be adopted and easily adapted for new concepts and studies – external ergonomics documentation almost becomes superfluous.

Dates

  I would like to make an individual appointment

Bus Icons

Develop highly efficiently and test your new concepts

Dates

  I would like to make an individual appointment

Aircraft Kacheln

View of the instruments

Test the pilot’s view of the instruments

Dates

  I would like to make an individual appointment

Portal Kacheln 3

Dates

  I would like to make an individual appointment

IV Kacheln 2

Special analysis for visual standards

Vision as added value in the market – verification of visual standards on the CAD model and testing for optimal use at work.

Dates

  I would like to make an individual appointment

Module_Kacheln_2er

Seat

RAMSIS Seat Design

Dates

  I would like to make an individual appointment

Consulting Kacheln

Perform the usability test

Dates

  I would like to make an individual appointment

Bus Kacheln 1

Posture models for professional drivers

Simulation of driver posture in different driving situations, such as semi-dynamic vehicle entry animation. Posture models are available in sitting, standing and supine positions – also for corpulent drivers.

Dates

  I would like to make an individual appointment

Adressen

Human Solutions of North America Inc.
215 Southport Drive, Suite 1400
Morrisville, NC 27560
USA

  Andre Lübke
andre.luebke@human-solutions.com

+1 919 741 6130 123
+1 919 677 1900
contact.usa@human-solutions.com
www.human-solutions.com

Dates

  I would like to make an individual appointment

Consulting Kacheln 1

High level of customer satisfaction

Dates

  I would like to make an individual appointment

IV Icons

More productivity and safety on the job

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Icons

Market-leading functionality for ergonomics analysis

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 1

Realistic test collectives worldwide

Based on the world’s largest anthropometric database, RAMSIS enables you to generate any target group, to define size, gender, population and age-specific characteristics and model them in 3D.

Dates

  I would like to make an individual appointment

Defense Icons

Realistic manikin with true-to-life protective clothing and equipment

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_2

Fast simulation

Automated sequence of posture calculations and analysis steps.

Dates

  I would like to make an individual appointment

Links rechts

Dates

  I would like to make an individual appointment

Defense Kacheln

Restriction of movement

with protective vest

Dates

  I would like to make an individual appointment

IV Galerie

Construction machines

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Icons

Used by the leading automobile manufacturers worldwide

Dates

  I would like to make an individual appointment

IV Kacheln 3

optimal vision and operability

Dates

  I would like to make an individual appointment

Aircraft Icons

Best possible use of space in the cockpit and passenger cabin

Dates

  I would like to make an individual appointment

Consulting Icons

Competence and resources

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Galerie

Automotive

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_3

significantly reduce development time

Dates

  I would like to make an individual appointment

Module_SeatDesign_Galerie

Adjustability

Dates

  I would like to make an individual appointment

Kacheln about us 2

New challenges in ergonomics: Our team of experts researches and supports the implementation of new concepts and vehicle models.

Dates

  I would like to make an individual appointment

Module_SeatBelt_Galerie

Component check

Dates

  I would like to make an individual appointment

Aircraft Kacheln 1

Behavior in the cockpit, cabin and workplace

Efficient ergonomic design of the cockpit and passenger cabin thanks to the simulation of the behavior of pilots, crew and passengers as early as the concept phase.

Dates

  I would like to make an individual appointment

Logos

  Project running

  Project closed

Dates

  I would like to make an individual appointment

Consulting Kacheln 2

Insourcing

Outsourcing

Coaching

Full service: Product design

Ensure optimum comfort and safe handling at the highest level. We take over the implementation of ergonomics studies for entire vehicles or sub-projects from the planning stage to the transfer of results – and if required, we’ll use third-party studies to supplement the ergonomics simulation with RAMSIS. You’ll receive your study results fully documented and comprehensibly prepared.

Dates

  I would like to make an individual appointment

Galerie

Dates

  I would like to make an individual appointment

Galerie

more information

Dates

  I would like to make an individual appointment

Kacheln about us 2

Comfort and safety right from the outset: Even the first CAD design takes ergonomics into account today.

Dates

  I would like to make an individual appointment

Portal Icons

Market-leading competence
methods, ergonomics and field studies

Dates

  I would like to make an individual appointment

IV Kacheln

A clear view

from the H-point or eyepoint view for identifying visual obstacles

Dates

  I would like to make an individual appointment

Module_SeatBelt_Galerie

Ergonomics

Dates

  I would like to make an individual appointment

Consulting BestPractice

Comparison of models with competitor models in terms of vision, reachability, seating position and adjustment ranges.

Dates

  I would like to make an individual appointment

F&E

Belt4All: virtualizing seat belt routing

In the project “Belt4All”, we are developing new methods and procedures for the manufacturer-independent digital design of seat belt systems in the automotive industry. The basic idea is to simulate seat belt routings in a 3D environment, enabling them to be better evaluated. Belt anchorage models, test body models and vehicle ambient geometry are all taken into account.

Dates

  I would like to make an individual appointment

Consulting Kacheln

Complete check: Ergonomics 360°

Dates

  I would like to make an individual appointment

Defense Kacheln 2

reliably assesses your vehicle occupants’ space requirements

Dates

  I would like to make an individual appointment

Aircraft Kacheln 1a

faster iteration and coordination in the development stage

Dates

  I would like to make an individual appointment

Bus Kacheln 3

up to 50% less development time and lower costs

Dates

  I would like to make an individual appointment

Aircraft Kacheln

Pedals in the cockpit

Optimal pedal adjustment range in the cockpit

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln

Direct and indirect vision

optimal field of view on displays and outside the vehicle

Dates

  I would like to make an individual appointment

Bus Icons

Analysis of attention, perceptibility and effort

Dates

  I would like to make an individual appointment

Kacheln about us 2

Fully digital development: RAMSIS gives you end-to-end digital development for the first time – because each digital iteration saves you time and money.

Dates

  I would like to make an individual appointment

Links links

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 1a

Ergonomics simulation

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 3

Usability & individualization

RAMSIS has a task editor, definition & control of object kinematics, the ability to manually align postures, a motion recorder and a configuration menu for defining user-specific settings.

Dates

  I would like to make an individual appointment

Portal Kacheln 2

Significantly improve time-to-market

Dates

  I would like to make an individual appointment

IV Kacheln 2

Realistic international test collectives in 3D

Driver populations for domestic and foreign markets, including an own library for corpulent drivers and a detailed library for hand movement ergonomics.

Dates

  I would like to make an individual appointment

Aboutus Only at

Time-to-market

Dates

  I would like to make an individual appointment

Module_Cognitive_Galerie

Occlusion

Dates

  I would like to make an individual appointment

Portal Kacheln 3

Dates

  I would like to make an individual appointment

Kacheln Karriere

We achieve much – and make much possible

We give our all for our customers and for research! But we also push our company envelope when it comes to career planning or more flexibility for the family.

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Icons

Posture models and physiological joint simulation

Dates

  I would like to make an individual appointment

Defense Icons

Highly efficient digital development with a high degree of realism

Dates

  I would like to make an individual appointment

Bus Kacheln 1

Perfect vision in Bus & Truck

The positioning and design of display elements contributes a lot to how intensively the driver’s vision can remain on the road. RAMSIS offers comprehensive analysis options for the driver’s cab, e.g. for reflection and the optical properties of displays.

Dates

  I would like to make an individual appointment

Module_VirtAging_Galerie

Movement

Dates

  I would like to make an individual appointment

Consulting Kacheln 1

Benchmark/competitiveness of products

Dates

  I would like to make an individual appointment

IV Icons

Complete vehicle control – without specific model knowledge

Dates

  I would like to make an individual appointment

Kacheln EaaS

Basic reach and positioning

The central ergonomic parameters for your CAD mockup

Dates

  I would like to make an individual appointment

Adressen

Human Solutions of North America Inc.
215 Southport Drive, Suite 1400
Morrisville, NC 27560
USA

  Andre Lübke
andre.luebke@human-solutions.com

+1 919 741 6130 123
+1 919 677 1900
contact.usa@human-solutions.com
www.human-solutions.com

Dates

  I would like to make an individual appointment

Kacheln Karriere 1

you’ll learn the kind of leadership that’s oriented on clear performance targets

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 1

Role-based posture calculation

The RAMSIS occupants can be given different roles, each of which knows its typical posture and movement models. RAMSIS automatically calculates these task and role-specific postures based on the vehicle interior. Thanks to state-of-the-art posture studies, the virtual test persons behave realistically when sitting, standing or performing tasks.

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Icons

Up to 50% time and cost savings in development

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_2

Seats with an ergonomic concept

Consideration of special H30 values for different vehicle concepts (e.g. sports cars, SUVs, vans).

Dates

  I would like to make an individual appointment

IV Kacheln 3

compliance with standards as early as the CAD model stage

Dates

  I would like to make an individual appointment

Aircraft Icons

Reliable implementation and coordination of customer requirements on the CAD model

Dates

  I would like to make an individual appointment

Links rechts

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Galerie

Aircraft

Dates

  I would like to make an individual appointment

Defense Kacheln

Space requirements

when entering or exiting the vehicle in full gear

Dates

  I would like to make an individual appointment

Bus Kacheln 2

A question of posture

Coupling of posture calculation and visual analysis

Dates

  I would like to make an individual appointment

IV Galerie

Agricultural machines

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Direct and indirect vision

Instruments and streets in view – also with the help of mirrors

Dates

  I would like to make an individual appointment

Defense Kacheln 1

Movement restriction with equipment

A vehicle occupant wearing a helmet must lower his head more than he would do with no helmet on – and in ankle-high boots, the movement of his feet is also restricted. RAMSIS automatically addresses movement restrictions imposed on individual parts of the body by clothing or equipment.

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_3

achieve early product maturity while still at the digital model stage

Dates

  I would like to make an individual appointment

Aircraft Kacheln 1

Specific pilot posture model

Automatic calculation of realistic pilot postures for the best possible evaluation of vision, reachability and cognitive perception.

Dates

  I would like to make an individual appointment

Consulting Icons

Simulation and field studies

Dates

  I would like to make an individual appointment

Consulting Kacheln 2

Innovation: Ergonomics 4.0

Create fresh impetus for better products and future models. The world of ergonomics is changing. Autonomous driving, car sharing and increasing demands from international markets are creating new challenges for ergonomics. We will bring new technical possibilities and research results to your product ergonomics – exact test person pools, benchmarks, field studies and basic design for new vehicle concepts.

Dates

  I would like to make an individual appointment

Icons about us

Present in 144 countries

Dates

  I would like to make an individual appointment

Galerie

Dates

  I would like to make an individual appointment

Galerie

Dates

  I would like to make an individual appointment

Icons about us

50 employees

Dates

  I would like to make an individual appointment

Portal Icons

Real 3D populations
The world’s most precise database

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln

A space miracle

ergonomic specifications for instrument positioning

Dates

  I would like to make an individual appointment

IV Kacheln

Effort

Estimation of actuating forces for operating elements

Dates

  I would like to make an individual appointment

Aircraft Kacheln

Passenger comfort

Knee freedom and access to economy seats

Dates

  I would like to make an individual appointment

Links links

Movement

Dates

  I would like to make an individual appointment

Consulting BestPractice

SAE design with new RAMSIS test collective (including BMI +25), with specification creation and a RAMSIS license.

Dates

  I would like to make an individual appointment

F&E

SafeWatch: testing visual standards for the bus and truck industries

In the “SafeWatch” project, we intend to incorporate existing national and international visual standards into the development of vehicles in such a way that they can be tested digitally during the prototypical implementation of 3D vehicle models.

Dates

  I would like to make an individual appointment

Portal Kacheln 2

Increase product attractiveness for users

Dates

  I would like to make an individual appointment

Bus Icons

Specific truck driver database – also for corpulent drivers

Dates

  I would like to make an individual appointment

Module_Cognitive_Galerie

Reflection

Dates

  I would like to make an individual appointment

Aboutus Only at

Costs

Dates

  I would like to make an individual appointment

Bus Kacheln 3

rapid testing of new design and ergonomics concepts

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 1a

RAMSIS in the project

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 3

Availability & possible platforms

RAMSIS is available either as stand-alone software for Windows or fully integrated into Catia V5 and Siemens NX. RAMSIS or ergonomics data from RAMSIS can also be integrated into design systems, and RAMSIS geometries can be imported or exported using standard formats.

Dates

  I would like to make an individual appointment

Kacheln Karriere

It’s the result that counts

And hopefully this applies to you as well. Targeted commitment is important to us, which is why our managers shape their leadership approaches based on clear performance targets.

Dates

  I would like to make an individual appointment

Defense Icons

Automatic consideration of equipment for space requirements and posture

Dates

  I would like to make an individual appointment

IV Icons

Ergonomic design, even for foreign markets

Dates

  I would like to make an individual appointment

Kacheln EaaS

Real ergonomic protection

From design to evaluation

Dates

  I would like to make an individual appointment

Aircraft Kacheln 1a

the simple testing of different design options

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 1

Integration of field studies and statistical data

RAMSIS can integrate the data of individual test persons or use it for defining the test persons pool. The software is also based on data from field studies on movement behavior in vehicles, in interiors and on the operation of elements in the vehicle.

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_2

Optimal for projects

Impressive project efficiency, thanks to standardized procedures and optimal documentation.

Dates

  I would like to make an individual appointment

IV Kacheln 3

a reduction in driver fatigue through ergonomic design

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Bus Kacheln 1

Realistic international 3D test collectives

Consideration of international driver populations for domestic and foreign markets including an own library for corpulent drivers. Items of equipment can also be attached to the drivers for realistic simulation.

Dates

  I would like to make an individual appointment

Aircraft Icons

Shorter development time and faster results

Dates

  I would like to make an individual appointment

Consulting Kacheln 1

 Acceleration of processes and absorption of load peaks

Dates

  I would like to make an individual appointment

Kacheln Karriere 1

you’ll have short decision-making paths in your team

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_3

define and select realistic test collectives

Dates

  I would like to make an individual appointment

Bus Kacheln 2

Clear vision

Analysis of the direct or indirect view incl. reflection

Dates

  I would like to make an individual appointment

Module_SeatDesign_Galerie

Seat cushions

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Advanced visual analyses

Visual acuity, time of gaze change or reflection

Dates

  I would like to make an individual appointment

Defense Kacheln

Equipment

in posture calculation

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Icons

High level of product maturity in interior design, operability and compliance with standards

Dates

  I would like to make an individual appointment

Module_VirtAging_Galerie

Fields of vision

Dates

  I would like to make an individual appointment

Aircraft Kacheln 1

Collectives for pilots, crew and passengers

Derivation of the size variation of optimal populations for interior dimensions from the world’s most comprehensive 3D body dimension database.

Dates

  I would like to make an individual appointment

Consulting Icons

Real and digital test collectives

Dates

  I would like to make an individual appointment

Consulting Kacheln 2

Agile Development: Engineering as a Service

We will provide you with support that exactly meets your requirements using outsourcing, insourcing or project coaching. If there is a lack of skilled workers or if they are needed at peak times, we will support you in all areas of ergonomic product design. Our experts will bring their experience and manpower to your organization on a project or contract basis.

Dates

  I would like to make an individual appointment

Galerie

Dates

  I would like to make an individual appointment

Defense Kacheln 1

Perfect assessment of space requirements with equipment

Accessibility, space requirements and posture are calculated under realistic conditions with the usual degree of RAMSIS perfection and reliability. Posture and movement are automatically adapted to the equipment.

Dates

  I would like to make an individual appointment

Links rechts

Space requirements

Dates

  I would like to make an individual appointment

Consulting Kacheln

Complete check: target group 50+

Dates

  I would like to make an individual appointment

Defense Kacheln 2

automatically address movement restrictions for realistic accessibility analyses

Dates

  I would like to make an individual appointment

Module_SeatBelt_Galerie

eBTD

Dates

  I would like to make an individual appointment

Consulting Kacheln

Load check

Dates

  I would like to make an individual appointment

Defense Kacheln 2

select sizes automatically to match anthropometry place equipment perfectly

Dates

  I would like to make an individual appointment

Links rechts

Vision

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Room and space requirements

Enough room for drivers, passengers or employees

Dates

  I would like to make an individual appointment

Portal Kacheln 2

Save on costs for physical prototypes

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln

Safety

analysis of the belt routing over driver and passengers

Dates

  I would like to make an individual appointment

Module_Cognitive_Galerie

360°

Dates

  I would like to make an individual appointment

Kacheln about us 2

Time-to-market: Physical prototypes are only needed for final inspection or product acceptance. Nowadays, even compliance with standards can be clarified digitally.

Dates

  I would like to make an individual appointment

Aircraft Kacheln

Safety in an emergency

Accessibility of oxygen masks

Dates

  I would like to make an individual appointment

F&E

EBDIG-WFSV: knowledge transfer to the shipping industry

The “European Boat Design Innovation Group - Wind Farm Support Vessel” (EBDIG–WFSV) project is funded by the European Union. It involves the transfer of knowledge from the automotive to the shipping industry – and for the first time we’re making our CAD manikin RAMSIS “shipshape”. The research objects are ships that transport people to work on offshore wind farms.

Dates

  I would like to make an individual appointment

Bus Kacheln 1

Reachability and passive balance

RAMSIS can also show whether the posture remains stable during an activity, such as closing and opening the door during ingress/egress.

Dates

  I would like to make an individual appointment

Bus Kacheln 3

specialized anthropometric data for truck and bus drivers

Dates

  I would like to make an individual appointment

Links links

Posture

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 1

Animation, movement and the attachment of objects

Many animation and simulation functions are available in RAMSIS. Manikin movements can be recorded for simple simulation of processes. Objects (e.g. shoes or helmets) can be attached to occupants and included in the posture calculation and analysis. RAMSIS also has an integrated gender-dependent shoe library.

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_2

More than SAE

Ergonomic vehicle design that exceeds SAE minimum requirements.

Dates

  I would like to make an individual appointment

IV Kacheln 3

the simple verification of different design options

Dates

  I would like to make an individual appointment

Module_VirtAging_Galerie

Accommodation skills and gaze changes

Dates

  I would like to make an individual appointment

Module_Kacheln_3er

Visual standards

RAMSIS Visual Standards and Directives

Dates

  I would like to make an individual appointment

Kacheln EaaS

Interior Design

Digital ergonomic protection

Dates

  I would like to make an individual appointment

Aircraft Kacheln 1a

a high level of product maturity as early as the design phase

Dates

  I would like to make an individual appointment

Module_SeatDesign_Galerie

Attachments

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Consulting Kacheln 1

Cost and planning security in development

Dates

  I would like to make an individual appointment

IV Galerie

Boats & Ships

Dates

  I would like to make an individual appointment

Kacheln Karriere 1

you’ll work with renowned customers worldwide

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_3

achieve optimal cooperation in your projects

Dates

  I would like to make an individual appointment

Bus Kacheln 2

Effective rest period

Supine posture models for designing the driver’s cabin

Dates

  I would like to make an individual appointment

Module_SeatBelt_Galerie

Crash Test/Hybrid III

Dates

  I would like to make an individual appointment

IV Kacheln

Reachability

Optimal placement of controls such as joysticks

Dates

  I would like to make an individual appointment

Links rechts

Safety

Dates

  I would like to make an individual appointment

Bus Kacheln 2

Door to XXL

Effort required to close the driver’s door

Dates

  I would like to make an individual appointment

Consulting Kacheln

Ingress /Egress analyses

Dates

  I would like to make an individual appointment

Aircraft Kacheln 1a

reduced development costs

Dates

  I would like to make an individual appointment

Portal Kacheln 2

Save time in product development

Dates

  I would like to make an individual appointment

Bus Kacheln 3

posture models and calculations for corpulent drivers

Dates

  I would like to make an individual appointment

F&E

ARVIDA: the creation of a service-oriented reference architecture for virtual technologies (VT)

ARVIDA will be used for a number of different application scenarios. Within this framework, we will set up a process for motion simulation and evaluation based on measured movements for ergonomic applications in the commercial vehicle sector – and we will also implement the relevant tools. This process will be run and assessed in several specific application scenarios.

Dates

  I would like to make an individual appointment

Module_Cognitive_Galerie

Fields of vision

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_2

Ergonomics for everyone

Simulation of drivers and passengers on all seating in a car.

Dates

  I would like to make an individual appointment

Aircraft Kacheln

On-board entertainment

Usability of the entertainment systems

Dates

  I would like to make an individual appointment

Module_Kacheln_3er

Age & Demography

RAMSIS VirtualAging

Dates

  I would like to make an individual appointment

Links links

Force

Dates

  I would like to make an individual appointment

Kacheln Karriere 1

you’ll have flexibility for planning your career and time for your family

Dates

  I would like to make an individual appointment

IV Kacheln 3

a high level of product maturity for international markets

Dates

  I would like to make an individual appointment

Module_VirtAging_Galerie

Posture

Dates

  I would like to make an individual appointment

Module_SeatDesign_Galerie

Adjustability

Dates

  I would like to make an individual appointment

Adressen

Tecmes
Av. Jabaquara 2940, cj. 21, Planalto Paulista
São Paulo, SP, CEP 04046-500
Brazil

 Sidney Ortega Pace
sidney@tecmes.com.br

+55 11 2197 1015
+55 11 2197 1007
www.tecmes.com.br

Dates

  I would like to make an individual appointment

Consulting Kacheln 1

Flexibility and agility in development

Dates

  I would like to make an individual appointment

IV Galerie

Train

Dates

  I would like to make an individual appointment

IV Kacheln

Climbing up into and entering the vehicle

Accessibility and space requirements for ingress/egress

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Enough force

Maximum permissible actuating forces for operating elements

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln

Vehicle ingress and egress

analysis of ingress and egress dimensions

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_3

compare all the results

Dates

  I would like to make an individual appointment

Aircraft Kacheln

The crew at work

Space requirements with trolleys in the aisle

Dates

  I would like to make an individual appointment

Module_SeatBelt_Galerie

Crash Test/Q-Dummy

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Seats

Optimum seat adjustment range and seat design for test collectives

Dates

  I would like to make an individual appointment

Module_Cognitive_Galerie

Gaze changes

Dates

  I would like to make an individual appointment

IV Kacheln

Perception

The visibility and readability of information

Dates

  I would like to make an individual appointment

RUC@home

Award ceremony of the RAMSIS Excellene Award and presentation

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln_2

Ergonomics benchmark

Comparison of different design concepts from an ergonomic point of view in CAD.

Dates

  I would like to make an individual appointment

F&E

UDASIM: a method for simulating a comprehensive discomfort sensation

UDASIM addresses the relevant individual factors of force, sitting pressure and posture. To simulate these individual factors, the commercial manikins CASIMIR, RAMSIS and ANYBODY are combined by means of a uniform data interface. The model for the comprehensive, multidimensional sense of discomfort is realized by means of an artificial neural network, which receives the calculated individual factors of the combined human models as input variables.

Dates

  I would like to make an individual appointment

Consulting Kacheln

Seats tests

Dates

  I would like to make an individual appointment

Adressen

Feiran Technology Sdn Bhd
B-11-01 & B-11-02, Tower B, PJ Trade Centre, No. 8,
Jalan PJU 8/8A, Bandar Damansara Perdana, PJU 8
47820 Petaling Jaya, Selangor Darul Ehsan
Malaysia

 Shariman Ghazali
shariman@feiran.com.my

+60 3 7726 1230
+60 3 7726 2230
shariman@feiran.com.my
www.feiran.com.my

Dates

  I would like to make an individual appointment

Links links

Perception

Dates

  I would like to make an individual appointment

Bus Kacheln 2

Climbing up

Load on joints during the climb up to the cabin

Dates

  I would like to make an individual appointment

Module_VirtAging_Galerie

Force

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Galerie

Defense

Dates

  I would like to make an individual appointment

Logos

Dates

  I would like to make an individual appointment

Links rechts

Comfort/discomfort

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln

Sitting comfortably in the back

space requirements of passengers on the rear seat

Dates

  I would like to make an individual appointment

Aircraft Kacheln

Efficient maintenance

Feasibility of maintenance work

Dates

  I would like to make an individual appointment

IV Kacheln

Visual standards

Complying with vehicle-specific standards on the CAD model

Dates

  I would like to make an individual appointment

Consulting Kacheln

Vision check

Dates

  I would like to make an individual appointment

Links links

Dates

  I would like to make an individual appointment

F&E

Virtual Aging: a simulation to address age-related performance changes in the virtual design of processes and products

The objective of this research project is the development of a software to simulate age-related ability changes and individual ability limitations. The software will be used in the virtual planning of manual work processes and for product design based on digital human models. The common goal of the project participants is to build software solutions that go far beyond the capabilities of existing tools. Virtual Aging is a collaborative effort of the Human Solutions GmbH, the imk automotive GmbH and the Chemnitz Technical University Institute for Industrial Engineering and Innovation Management. The project is by the German Federal Ministry of Education and Research, within the context of the “KMU-innovativ” (SME innovative).

Dates

  I would like to make an individual appointment

Module_VirtAging_Galerie

Vision with spectacles

Dates

  I would like to make an individual appointment

Adressen

Beijing Jiangda Technology Co. Ltd.
Room 6-1-702, No.29 JingHai No.2 Road
Beijing Economic-Technological Development Area (BDA)
Beijing 100176
China

 Jiang Jing
jjiang@jiangda.com

+86 (10) 64926950
+86 (10) 64932278
www.jiangda.com

Dates

  I would like to make an individual appointment

Logos

Dates

  I would like to make an individual appointment

Links rechts

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln

Everything under control

optimization of display and storage concepts

Dates

  I would like to make an individual appointment

Bus Kacheln 2

Always in sight

Visibility/readability of displays

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Belt design

Belt routing over vehicle occupants and dummies

Dates

  I would like to make an individual appointment

RAMSIS_Autom_Kacheln

Sufficient force

maximum actuating force, e.g. when closing the trunk

Dates

  I would like to make an individual appointment

IV Kacheln

Seat

Optimum seat adjustment range for international driver populations

Dates

  I would like to make an individual appointment

Consulting Kacheln

Safety tests

Dates

  I would like to make an individual appointment

Aircraft Kacheln

Stow items safely

Analysis of the operating force needed to reach the overhead stowage compartment

Dates

  I would like to make an individual appointment

Links links

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

F&E

vLEAD: Resource-oriented and effective management models for digital project and team work

The vLead project targets the research, participatory development, practical testing and dissemination of concepts and instruments for the resource-oriented and effective management of digital project and team work. For SMEs in particular, these concepts and instruments are intended to promote innovation and performance, to improve the health of managers and employees and to support managers with the management and integration of employees. Human Solutions is working on the sub-project “Development of the vLEAD Innovation Process Tool to Support the Digital Management of Cross-Team Innovation Processes.”

The vLead research project is funded by the German Federal Ministry of Education and Research (BMBF) within the context of the “Innovations for the Production, Services and Work of Tomorrow” program and the European Social Fund (ESF).

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Ingress/egress analyses

Simulation of the motion sequence

Dates

  I would like to make an individual appointment

Logos

Dates

  I would like to make an individual appointment

Links rechts

Dates

  I would like to make an individual appointment

Bus Kacheln 2

Seating position

Analysis of human-seat interaction

Dates

  I would like to make an individual appointment

Consulting Kacheln

Secure marketing authorization

Dates

  I would like to make an individual appointment

RAMSIS_Allg_Kacheln 2

Virtual aging

Age-specific performance factors, e.g. strength and vision

Dates

  I would like to make an individual appointment

F&E

MOSIM: Modular simulation of realistic human movements for an end-to-end digital process chain

The MOSIM project is mainly aimed at enabling a holistic analysis of human movements by creating a modular simulation framework. In particular, interoperable concepts and approaches are to be developed that clearly reflect the realism of software for simulating human motion. At the same time, the effort involved in manual preparation and post-processing should be drastically reduced or automated by artificial intelligence and decision-making methods.

An approach like this increases the market potential of human simulation in several areas, and this is why MOSIM is tackling seven heterogeneous use cases to demonstrate the potential of the generic framework. The German consortium is planning to develop two independent demonstrators which will underscore the diverse usage possibilities of the generic approach.

The joint project MOSIM is funded by the Federal Ministry of Education and Research.

Dates

  I would like to make an individual appointment

Logos

Dates

  I would like to make an individual appointment

Adressen

EDS Technologies Private Limited
The Estate Second Floor
121 Dickenson Road
Bangalore 560042
India

 Karthikeyan Varadarajan
karthikeyan.blr@edstechnologies.com

+91 (80) 49190333
+91 (98) 45008573
www.edstechnologies.com

Dates

  I would like to make an individual appointment

Logos

Dates

  I would like to make an individual appointment

Adressen

Feiran Technology Sdn Bhd
B-11-01 & B-11-02, Tower B, PJ Trade Centre, No. 8,
Jalan PJU 8/8A, Bandar Damansara Perdana, PJU 8
47820 Petaling Jaya, Selangor Darul Ehsan
Malaysia

 Shariman Ghazali
shariman@feiran.com.my

+60 3 7726 1230
+60 3 7726 2230
shariman@feiran.com.my
www.feiran.com.my

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

F&E

DELFIN – Dynamic Evaluation of Vehicle Occupants

Digital product development in the automotive industry includes the implementation of ergonomic requirements. Digital manikins are used for the design and evaluation of the vehicle interior. During the development of many vehicle types, the ergonomic focus is also on the design of the entire cabin (e.g. vehicle ingress, operating procedures). Since the occupants interact dynamically with the vehicle, corresponding motion studies must be carried out to ensure that the ergonomics will provide safety and comfort. To date, these studies have been carried out on time-consuming and cost-intensive physical models of the cabin with test persons – so a digital solution is needed.

To acquire ergonomic information at an early stage, we require a technology that can predict movements and evaluate occupants on/in the vehicle model. The DELFIN project implements the technology for the simulation of vehicle occupant movements into the RAMSIS digital manikin. The movements of the occupants in a vehicle environment will be calculated automatically with the help of a library of measured movements. Users will then be able to interactively manipulate and assemble them.

The technology for movement prognosis and evaluation should become generally usable in vehicle development (e.g. cars, trucks, airplanes & agricultural and construction machinery) and validated in various truck & car applications during the life of the project.

The joint project DELFIN is funded by the Federal Ministry of Education and Research within the framework of the ‘KMU-innovativ’ program. Launched on May 1, 2019, the program will run until April 30, 2022.

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

ARMORIA Ltd.
55 Hohit st
44851 Alfe Menashe
Israel

 Efi Huber
armoria@bezeqint.net

+972 77 705 6330

Dates

  I would like to make an individual appointment

Adressen

ABEX Italia srl.
Via Torino, 43
10043 Orbassano (TO)
Italy

 Gianni Alberico
alberico@abex.it

+39 01 19034411
+39 01 19031113
www.abex.it

Dates

  I would like to make an individual appointment

Adressen

3D Incorporated
4F KDX Shin-Yokohama Bldg., 2-3-8 Shin-Yokohama, Kohoku-ku
Yokohama 222-0033
Japan

 Kei Aoki
3d-info@ddd.co.jp

+81-50-5533-3377
+81-50-5533-3378
http://www.ddd.co.jp/product/ramsis/

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

Empias Inc.
#1710, HallaSigma Valley, 53, Gasan digital 2-ro, Geumcheon-gu
Seoul 08588
Korea

 Su-Yeal Ryu
syryu@empias.co.kr

+82 (2) 2042-8200
+82 (2) 6443-5109
www.empias.co.kr

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

Feiran Technology Sdn Bhd
B-11-01 & B-11-02, Tower B, PJ Trade Centre, No. 8,
Jalan PJU 8/8A, Bandar Damansara Perdana, PJU 8
47820 Petaling Jaya, Selangor Darul Ehsan
Malaysia

 Shariman Ghazali
shariman@feiran.com.my

+60 3 7726 1230
+60 3 7726 2230
shariman@feiran.com.my
www.feiran.com.my

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

Feiran Technology Sdn Bhd
B-11-01 & B-11-02, Tower B, PJ Trade Centre, No. 8,
Jalan PJU 8/8A, Bandar Damansara Perdana, PJU 8
47820 Petaling Jaya, Selangor Darul Ehsan
Malaysia

 Shariman Ghazali
shariman@feiran.com.my

+60 3 7726 1230
+60 3 7726 2230
shariman@feiran.com.my
www.feiran.com.my

Dates

  I would like to make an individual appointment

Adressen

Feiran Technology Sdn Bhd
B-11-01 & B-11-02, Tower B, PJ Trade Centre, No. 8,
Jalan PJU 8/8A, Bandar Damansara Perdana, PJU 8
47820 Petaling Jaya, Selangor Darul Ehsan
Malaysia

 Shariman Ghazali
shariman@feiran.com.my

+60 3 7726 1230
+60 3 7726 2230
shariman@feiran.com.my
www.feiran.com.my

Dates

  I would like to make an individual appointment

Adressen

Human Solutions of North America Inc.
215 Southport Drive, Suite 1400
Morrisville, NC 27560
USA

  Andre Lübke
andre.luebke@human-solutions.com

+1 919 741 6130 123
+1 919 677 1900
contact.usa@human-solutions.com
www.human-solutions.com

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

BEE PITRON
B. Pochtovaia, st. 5
105082 Moscow
Russia

 Pavel Goldovsky
gps@beepitron.com

+7 495 601 93 73
+7 495 601 93 72
www.bee-pitron.ru

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

Feiran Technology Sdn Bhd
B-11-01 & B-11-02, Tower B, PJ Trade Centre, No. 8,
Jalan PJU 8/8A, Bandar Damansara Perdana, PJU 8
47820 Petaling Jaya, Selangor Darul Ehsan
Malaysia

 Shariman Ghazali
shariman@feiran.com.my

+60 3 7726 1230
+60 3 7726 2230
shariman@feiran.com.my
www.feiran.com.my

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

Feiran Technology Sdn Bhd
B-11-01 & B-11-02, Tower B, PJ Trade Centre, No. 8,
Jalan PJU 8/8A, Bandar Damansara Perdana, PJU 8
47820 Petaling Jaya, Selangor Darul Ehsan
Malaysia

 Shariman Ghazali
shariman@feiran.com.my

+60 3 7726 1230
+60 3 7726 2230
shariman@feiran.com.my
www.feiran.com.my

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

BEE PITRON
B. Pochtovaia, st. 5
105082 Moscow
Russia

 Pavel Goldovsky
gps@beepitron.com

+7 495 601 93 73
+7 495 601 93 72
www.bee-pitron.ru

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

Adressen

Design Rule Limited
Innovation Centre
Silverstone Technology Park
Silverstone, Northamptonshire, NN12 8GX
United Kingdom

 Luke Howard - Sales
Luke.howard@designrule.co.uk

 Kevin Stokes - Technical
Kevin.stokes@designrule.co.uk

+44 (1604) 491661
www.designrule.co.uk

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr


BEE PITRON
B. Pochtovaia, st. 5
105082 Moscow
Russia

 Pavel Goldovsky
gps@beepitron.com

+7 495 601 93 73
+7 495 601 93 72
www.bee-pitron.ru

Dates

  I would like to make an individual appointment

Adressen

Feiran Technology Sdn Bhd
B-11-01 & B-11-02, Tower B, PJ Trade Centre, No. 8,
Jalan PJU 8/8A, Bandar Damansara Perdana, PJU 8
47820 Petaling Jaya, Selangor Darul Ehsan
Malaysia

 Shariman Ghazali
shariman@feiran.com.my

+60 3 7726 1230
+60 3 7726 2230
shariman@feiran.com.my
www.feiran.com.my

Dates

  I would like to make an individual appointment

Adressen

infoTRON A.S.
Ataturk Caddesi Cagatay Sokak No: 9
Sancaktepe 34785 Istanbul
Turkey

 Burak Pekcan
burak.pekcan@infotron.com.tr

+90 (216) 651 09 55
+90 (216) 651 09 54
www.infotron.com.tr

Dates

  I would like to make an individual appointment

I herewith declare my consent and accept the data protection regulations of Human Solutions GmbH.
* All fields are necessary